Hands-on tutorial
Tutorials · PoE
How to Power and Network Access Control Door Readers With PoE
Connect door controllers, readers, intercoms and electric locks over PoE: power budgets including locks, fail-safe behaviour, separate VLANs and UPS backup.
Before you start
- The access control system's controller and reader datasheets
- Lock types (fail-safe or fail-secure) and their power
- A PoE switch with enough budget, ideally PoE+ or PoE++
Step by step
Add up the power per door
A door can include a controller, one or two readers, an intercom and a lock. Locks can draw several watts, more when they engage. Check that the door's total fits the PoE class of its port.
Use PoE-powered door controllers where possible
Many controllers take PoE+ or PoE++ in and power the readers and the lock from it, so one cable runs to each door.
Respect fail-safe and fail-secure rules
Fire codes often require fail-safe locks on escape routes, which unlock when power is lost. Coordinate with the fire and security consultants before relying on PoE for locks.
Separate the network
Put access control on its own VLAN, allow only traffic to the access control server, and block internet access unless the system needs its cloud.
Back up the power
Put the PoE switch for doors on a UPS so doors keep working during outages, and test what happens when the UPS runs out.
Monitor the ports
Alert on PoE port faults and device offline events: a reader that loses power is a security gap.
Pro tips
- Label door ports clearly on the switch and patch panel.
- Avoid scheduled PoE reboots on door ports.
- Keep spare PoE budget for adding readers later.
FAQ
Frequently asked questions
Can PoE power a magnetic lock?
Small locks can be powered through a PoE-powered controller within its budget; larger locks often need a dedicated power supply.
What happens to doors if the switch reboots?
It depends on the lock type and controller; fail-safe locks unlock, fail-secure stay locked. Plan for it and use UPS power.
Keep learning
Related guides
Choose the right PoE standard
Read more →UPS backup for PoE switches
Read more →Connect IoT devices safely
Read more →How to Use PoE Scheduling and Remote Power-Cycling
Save energy by switching PoE off outside business hours, and reboot a frozen camera or access point remotely.
Read more →How to Troubleshoot PoE Devices That Won't Power Up or Keep Rebooting
A systematic checklist for cameras and access points that stay dark, flicker or reboot at night.
Read more →How to Choose the Right PoE Standard (802.3af, 802.3at or 802.3bt) for Each Device
Match every IP camera, access point and phone to the right PoE class, check the switch port and the total budget, and avoid devices that reboot or never power up.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.