Hands-on tutorial
Tutorials · Security
How to Connect IoT Devices Safely: Separate SSID, VLAN and Firewall Rules
Put smart TVs, sensors, door controllers and building systems on their own network, give each only the access it needs, and keep them away from staff laptops and servers.
Before you start
- A list of IoT devices and what each needs to reach
- Switches and access points with VLAN support
- A gateway or firewall between VLANs
Step by step
List devices and their needs
For each type, note what it talks to: a cloud service, a local controller, the NVR, or nothing outside its own system.
Create an IoT VLAN and SSID
Many IoT devices only support 2.4 GHz and WPA2-Personal. Give them a dedicated SSID on an IoT VLAN, separate from staff and guests.
Block by default between VLANs
Allow nothing from the IoT VLAN to staff, server and management VLANs. Then allow only specific flows, such as the building controller to its devices.
Limit internet access
Allow only the cloud services each device needs, or no internet at all for systems that work locally.
Change default passwords and update
Replace default credentials, disable unused services such as Telnet and UPnP, and keep firmware updated.
Watch for new devices
Use DHCP logs, network discovery or NAC to spot new devices on the IoT network and confirm they belong there.
Pro tips
- Use a different pre-shared key for the IoT SSID than for anything else.
- Cameras and NVRs deserve their own VLAN, separate from other IoT.
- Document every allowed flow and review it yearly.
FAQ
Frequently asked questions
Why not keep IoT on the staff Wi-Fi?
Many IoT devices are rarely updated. On the staff network, a compromised device can attack laptops and servers.
Will casting to a TV work across VLANs?
Casting relies on discovery protocols that do not cross VLANs by default. Use the gateway's mDNS gateway feature, or keep casting devices with their users.
Keep learning
Related guides
Segment IoT and CCTV networks
Read more →Configure VLANs on a managed switch
Read more →What is network access control?
Read more →How to Enable 802.1X Port Authentication on Switches
Stop unknown devices from using your network ports: configure 802.1X with RADIUS and MAC-authentication bypass for printers and cameras.
Read more →How to Secure the Management of Switches, Routers and Access Points
A hardening checklist for every network device: strong credentials, SSH only, a management VLAN, access lists and logging.
Read more →How to Segment IoT and CCTV Devices From Your Main Network
Put cameras, smart TVs, sensors and building systems in their own VLANs so one compromised device cannot reach your business systems.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.