Hands-on tutorial
Tutorials · Routing & Internet
How to Optimise Your Network for Video Meetings
Stop frozen faces and robotic audio in video calls: measure upload, prioritise real-time traffic, fix Wi-Fi in meeting rooms, avoid VPN hairpins and plan for meeting rooms with displays.
Before you start
- Access to the gateway and Wi-Fi settings
- Information on how many people join calls at peak times
- A speed and quality test from meeting rooms
Step by step
Size the upload
Video meetings send as much as they receive. Multiply the number of simultaneous calls by a few Mbit/s each and compare with the internet upload speed.
Shape and prioritise
Shape the internet link slightly below its real speed and give real-time traffic priority over downloads and backups.
Fix meeting room Wi-Fi
Meeting rooms fill with laptops at once. Make sure there is an access point in or near each room and good 5 GHz or 6 GHz coverage.
Wire the room systems
Connect meeting-room computers, displays and video bars by Ethernet, with PoE where needed.
Avoid VPN hairpins
Sending meeting traffic through a head-office VPN adds delay. Let trusted meeting services go directly to the internet where policy allows.
Test at busy times
Run quality tests during peak hours and check jitter and loss, not just speed.
Pro tips
- Schedule large updates and backups outside office hours.
- Keep a wired port available in each meeting room.
- Monitor the internet link continuously.
FAQ
Frequently asked questions
How much bandwidth does a video call need?
Typically a few Mbit/s in each direction for HD, more for group calls with screen sharing.
Why is audio choppy while video is fine?
Usually jitter or loss; prioritise real-time traffic and check Wi-Fi quality.
Keep learning
Related guides
What is QoS?
Read more →Latency, jitter and packet loss
Read more →Bandwidth limits per user
Read more →How to Set Up Dual-WAN Failover With a 4G LTE Backup
Keep a branch online when the fibre fails: add a 4G LTE link as a backup WAN with health checks and automatic failover.
Read more →How to Plan IP Addressing and Subnets for a Business Network
A clean IP plan makes networks easier to secure, troubleshoot and grow. Learn a simple scheme you can reuse on every site.
Read more →How to Configure DHCP Scopes, Reservations and Options
Hand out addresses reliably: one scope per VLAN, reservations for printers and cameras, the right DNS and gateway options and sensible lease times.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.