Hands-on tutorial

Tutorials · Routing & Internet

How to Set Bandwidth Limits per User, VLAN and Guest Network

Share an internet link fairly: limit guests and heavy users, guarantee bandwidth for business traffic, and stop one download from slowing everyone down.

Beginner8 min6 steps

Before you start

  • A gateway with traffic shaping or QoS
  • The real upload and download speeds of the internet link
  • The VLANs or groups you want to limit

Step by step

  1. Measure the real link speed

    Run several speed tests at quiet times. Shaping works only when limits are set slightly below the real speed, about 90–95%.

  2. Shape the whole link first

    Set total download and upload limits on the WAN. This moves queues from the ISP's equipment into your gateway, where you control them.

  3. Limit per user on guest networks

    Give each guest device a cap, for example 10/5 Mbit/s, so one guest can't use the whole link. Hotels often offer a higher tier for premium guests.

  4. Limit or guarantee per VLAN

    Give staff, voice and payment terminals guaranteed shares, and put guests and IoT in lower classes that can borrow unused bandwidth.

  5. Prioritise real-time traffic

    Put voice and video calls in the highest priority queue, then business apps, then bulk downloads and updates.

  6. Test at busy times

    Run a large download on a guest device and check a video call on a staff device stays smooth.

Pro tips

  • Smart queueing (fq_codel or CAKE where available) reduces lag for everyone.
  • Schedule large updates outside business hours.
  • Review usage reports monthly and adjust limits.