Networking · 5 min read · 19 November 2026
Latency, Jitter and Packet Loss: What They Mean and Why They Matter
The three measures of network quality explained simply: what latency, jitter and packet loss are, typical good values for voice, video and gaming, causes and how to measure them.
Bandwidth is how much data a link can carry; latency, jitter and packet loss describe how well it carries it. Real-time applications such as calls and video meetings depend far more on these three than on raw speed.
The three measures
| Measure | What it is | Users notice |
|---|---|---|
| Latency | Time for a packet to reach its destination (often measured round-trip) | Delay in conversations, slow interactive apps |
| Jitter | Variation in latency between packets | Choppy or robotic voice, frozen video |
| Packet loss | Share of packets that never arrive | Gaps in audio, pixelated video, slow transfers |
Typical good values for voice and video
- One-way latency below about 150 ms.
- Jitter below about 30 ms.
- Packet loss below about 1%.
Common causes
- Congested uplinks, especially internet upload.
- Weak Wi-Fi signal and interference.
- Faulty cables and duplex mismatches.
- Long or poor-quality internet paths and VPN overhead.
How to improve
Prioritise real-time traffic with QoS, shape the internet uplink, fix Wi-Fi coverage, and monitor the link continuously. See monitoring WAN latency and loss and what is QoS.
FAQ
Frequently asked questions
Is low latency more important than high bandwidth?
For calls, video meetings and remote desktops, yes. For large downloads, bandwidth matters more.
How do I measure jitter?
Tools like ping series, mtr or VoIP quality reports show variation between packets over time.
What causes packet loss on Wi-Fi?
Weak signal, interference, overloaded access points and roaming problems.
Related
Keep reading
Monitor WAN latency and loss
Read more →Troubleshoot VoIP call quality
Read more →What is QoS?
Read more →Private 5G vs Wi-Fi for Enterprises: Which Wireless Technology Fits?
Compare private cellular networks and enterprise Wi-Fi for factories, ports, campuses and warehouses: coverage, mobility, device support, spectrum, cost and when to combine both.
Read more →What Is Port Security on a Switch? Stop Unknown Devices From Connecting
Switch port security explained: limiting MAC addresses per port, sticky learning, violation modes (protect, restrict, shutdown), when to use it and how it compares with 802.1X.
Read more →Warehouse and Logistics Network Design: Scanners, Cameras and Automation
How to design networks for warehouses and logistics centres: Wi-Fi for scanners and vehicles, outdoor yards and docks, CCTV, industrial switches for automation, and resilience.
Read more →Need help designing your network?
Navijin engineers provide free design consultations, bills of materials and quotations for business projects.