Hands-on tutorial
Tutorials · Fibre & GPON
How to Choose Fibre Optic Cable: Indoor, Outdoor, Armoured and Drop Cables
Pick the right fibre cable for risers, ducts, aerial runs and buildings: tight-buffered vs loose-tube, armour, fibre counts, fire ratings and connectors.
Before you start
- The route: inside a building, in ducts, direct-buried or aerial
- The number of links needed now and in future
- Local fire and building regulations
Step by step
Indoor cables
Tight-buffered cables are flexible and easy to terminate, for risers and patching inside buildings. Choose the fire rating required (for example LSZH for low smoke).
Outdoor cables
Loose-tube cables protect fibres from moisture and temperature changes, for ducts and between buildings. Use gel-free or dry designs for easier installation.
Armoured cables
Steel or glass armour protects against rodents and crushing, for direct burial and harsh industrial sites.
Aerial and drop cables
Self-supporting cables (ADSS or figure-8) run on poles; flat or round drop cables connect individual buildings or rooms in FTTH and GPON.
Choose the fibre count
Fibre is cheap compared with installation. Install spare fibres: at least double what you need today between buildings.
Choose termination
Field splicing gives the lowest loss; pre-terminated cables speed up installation where lengths are known.
Test and document
Test every fibre after installation and record loss and OTDR traces.
Pro tips
- Single-mode (OS2) is the default for new outdoor runs.
- Keep indoor-only cable out of outdoor ducts: it is not designed for moisture.
- Label both ends of each cable and each fibre.
FAQ
Frequently asked questions
Can I use outdoor cable inside a building?
Only for a short distance from the entry point, if fire rules allow; otherwise transition to an indoor-rated cable.
How many fibres should I install between buildings?
Enough for current links plus generous spares; 12 or 24 fibres is common for campus links.
Keep learning
Related guides
Single-mode vs multimode fibre
Read more →Organise fibre patch panels and ODFs
Read more →Find fibre faults with an OTDR
Read more →How to Provision ONUs on a GPON OLT
Bring a new subscriber or building online: discover the ONU, authorise it, apply a bandwidth profile and map services to VLANs.
Read more →How to Measure Optical Power and Check a Fibre Link Budget
Use an optical power meter and the device's DDM readings to confirm fibre links are healthy and within budget.
Read more →How to Design a GPON Splitter Plan for a Building
Plan PON ports, splitter ratios and locations for a hotel, tower or campus building, and check that every ONU has enough optical power.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.