Fibre · 6 min read · 19 November 2026
Single-Mode vs Multimode Fibre: Differences, Distances and Costs
Single-mode and multimode fibre compared: core size, colour codes, distances at 1G to 100G, transceiver costs, and which to choose for buildings, campuses and data centers.
Single-mode fibre (OS2) has a tiny 9 µm core and carries light over kilometres. Multimode fibre (OM3, OM4, OM5) has a 50 µm core and suits shorter runs inside buildings and data centers. For new installations, single-mode is usually the safer long-term choice; multimode can still save money on short, very high-speed links between racks.
At a glance
| Single-mode (OS2) | Multimode (OM3 / OM4) | |
|---|---|---|
| Core size | 9 µm | 50 µm |
| Typical jacket colour | Yellow | Aqua (OM3/OM4), lime (OM5) |
| 10G reach | 10 km (LR) and more | About 300 m (OM3) / 400 m (OM4) with SR |
| 100G reach | Up to 10 km and more | About 70 m (OM3) / 100 m (OM4) with SR4 |
| Typical use | Between buildings, campus, metro, GPON, risers | Inside one data hall or server room |
| GPON / XGS-PON | Yes (required) | No |
Why single-mode is the default for new builds
Single-mode supports every future speed over long distances, works for GPON and XGS-PON, and its transceivers have become much cheaper. Installing it once in risers and between buildings avoids re-cabling when speeds increase.
When multimode still makes sense
Short links between racks in one room, where parallel multimode optics or existing OM4 cabling make high speeds cheap. Many data centers mix multimode or direct-attach cables inside the row with single-mode between rows and halls.
Never mix them
A single-mode transceiver needs single-mode fibre and the reverse. Also check the connector polish (UPC blue, APC green), and keep connectors clean: see how to clean and inspect fibre connectors and how to choose SFP modules.
FAQ
Frequently asked questions
Is single-mode fibre more expensive?
The cable costs about the same. Single-mode optics used to cost much more; the gap is now small for 1G and 10G.
Can I upgrade OM3 to 100G?
Yes over short distances (about 70 m with SR4 optics). Check the length and loss of each link first.
What is OS1 vs OS2?
Both are single-mode. OS2 is the low-loss type used for most new installations, especially outdoors and over longer distances.
Related
Keep reading
Choose SFP transceivers and patch cords
Read more →GPON splitter plan for a building
Read more →GPON vs XGS-PON vs EPON
Read more →Private 5G vs Wi-Fi for Enterprises: Which Wireless Technology Fits?
Compare private cellular networks and enterprise Wi-Fi for factories, ports, campuses and warehouses: coverage, mobility, device support, spectrum, cost and when to combine both.
Read more →What Is Port Security on a Switch? Stop Unknown Devices From Connecting
Switch port security explained: limiting MAC addresses per port, sticky learning, violation modes (protect, restrict, shutdown), when to use it and how it compares with 802.1X.
Read more →Warehouse and Logistics Network Design: Scanners, Cameras and Automation
How to design networks for warehouses and logistics centres: Wi-Fi for scanners and vehicles, outdoor yards and docks, CCTV, industrial switches for automation, and resilience.
Read more →Need help designing your network?
Navijin engineers provide free design consultations, bills of materials and quotations for business projects.