Hands-on tutorial
Tutorials · Fibre & GPON
How to Design a Fibre Backbone for a Campus or Multi-Building Site
Connect buildings with a resilient fibre backbone: star or ring topology, dual routes, fibre counts, core placement, redundant uplinks and documentation.
Before you start
- A site map with buildings and existing ducts
- The number of users and services per building
- The location of the main data room
Step by step
Choose the core location
Place the core in the main data room with the best power, cooling and physical security.
Pick a topology
A star (each building to the core) is simple; a ring or dual star adds resilience. For critical sites, give each building two fibre routes on different paths.
Size fibre counts
Plan the links needed today, add spares generously (12–24 fibres per building is common), and remember fibre is cheap compared with digging.
Use single-mode fibre
Single-mode supports long distances and future speeds between buildings.
Design the uplinks
Connect each building's distribution switches to the core with two uplinks on separate fibres, using LACP or M-LAG, at 10G or more.
Protect against loops and failures
Use routed links or rapid ring protection, and test failover by disconnecting each path.
Document everything
Record routes, manholes, splice points, fibre allocations and test results.
Pro tips
- Avoid running both routes through the same duct or bridge.
- Leave slack loops in manholes for future repairs.
- Keep a stock of spare patch cords and optics.
FAQ
Frequently asked questions
Ring or star?
A star is simpler to manage; rings reduce digging and give two paths. Many campuses use a dual-star core with redundant links.
What speed for the backbone?
10G per building is common today; plan optics and fibre for 25G–100G growth.
Keep learning
Related guides
Single-mode vs multimode fibre
Read more →Ring redundancy with ERPS
Read more →Fibre cable types
Read more →How to Provision ONUs on a GPON OLT
Bring a new subscriber or building online: discover the ONU, authorise it, apply a bandwidth profile and map services to VLANs.
Read more →How to Measure Optical Power and Check a Fibre Link Budget
Use an optical power meter and the device's DDM readings to confirm fibre links are healthy and within budget.
Read more →How to Design a GPON Splitter Plan for a Building
Plan PON ports, splitter ratios and locations for a hotel, tower or campus building, and check that every ONU has enough optical power.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.