Hands-on tutorial

Tutorials · Fibre & GPON

How to Troubleshoot an ONU That Is Offline or Shows LOS on GPON

Work through the usual causes of an ONU that will not register or keeps dropping: optical power, fibre faults, wrong serial or profile, and rogue ONUs.

Intermediate9 min6 steps

Before you start

  • Access to the OLT management
  • An optical power meter with PON wavelengths
  • The ONU serial number and the splitter path to it

Step by step

  1. Read the ONU lights

    A red or blinking LOS light means no light reaches the ONU. A PON light that blinks without going steady means light is present but registration fails.

  2. Check the optical level

    Measure at the ONU with a PON power meter, or read the receive power on the OLT. GPON ONUs typically need about −8 to −27 dBm (class B+); weaker means a fibre, connector or splitter problem.

    show gpon onu optical-info gpon-onu_1/1/1:5
    
  3. Clean and check connectors

    Dirty or APC/UPC-mismatched connectors at the ONU or in the splitter box are the most common cause. Clean, inspect and reconnect.

  4. Check registration on the OLT

    Look for the ONU in the unconfigured or discovered list. A wrong serial number, wrong password or missing profile keeps it from coming online.

    show gpon onu uncfg
    show gpon onu state gpon-olt_1/1/1
    
  5. Check the other ONUs on the port

    If every ONU on a PON port is offline, the problem is at the OLT port, the feeder fibre or the first splitter. If one is, the problem is in its drop.

  6. Look for a rogue ONU

    An ONU that transmits all the time disturbs every other ONU on the port. If many ONUs drop at random, disconnect ONUs one by one, or use the OLT's rogue-ONU detection.

Commands are generic, industry-standard examples. Exact syntax and menu names vary by model and firmware; check your device's manual on the Documentation page.

Pro tips

  • Record optical levels at installation for comparison.
  • Keep spare drop cables and pre-terminated patch cords in the van.
  • Label ONUs with their PON port and splitter position.