Hands-on tutorial
Tutorials · PoE
How to Set PoE Port Priorities So Critical Devices Stay Powered
When a PoE switch runs short of power, it drops ports. Set priorities so cameras at entrances, phones in reception and access points stay on, and less critical devices go first.
Before you start
- A managed PoE switch with port priority
- A list of devices per port and their importance
Step by step
Understand when it matters
If total demand exceeds the PoE budget, for example when cameras turn on infrared at night or a power supply fails in a dual-PSU switch, the switch must cut power to some ports.
Classify devices
Critical: entrance cameras, door controllers, reception phones. High: access points. Low: desk phones in empty rooms, displays.
Set priorities
Assign critical, high and low priority to ports.
interface gi1/0/1 poe priority critical interface gi1/0/20 poe priority low
Choose the power management mode
Use a mode that allocates by actual consumption where available, so budget is not wasted on reserved but unused power.
Monitor headroom
Alert when PoE usage passes about 80% of the budget, so you can add capacity before ports are dropped.
Test
Simulate a shortage in a maintenance window, for example by reducing the budget limit, and confirm low-priority ports drop first.
Commands are generic, industry-standard examples. Exact syntax and menu names vary by model and firmware; check your device's manual on the Documentation page.
Pro tips
- Document priorities on the port labels.
- Review priorities when devices move.
- Use dual power supplies on switches that power critical devices.
FAQ
Frequently asked questions
What happens to ports with the same priority?
Usually the higher-numbered port is dropped first; check your switch's documentation.
Does priority help if the switch has no power at all?
No. Use UPS power for that.
Keep learning
Related guides
PoE budget guide
Read more →UPS backup for PoE switches
Read more →Troubleshoot PoE devices
Read more →How to Use PoE Scheduling and Remote Power-Cycling
Save energy by switching PoE off outside business hours, and reboot a frozen camera or access point remotely.
Read more →How to Troubleshoot PoE Devices That Won't Power Up or Keep Rebooting
A systematic checklist for cameras and access points that stay dark, flicker or reboot at night.
Read more →How to Choose the Right PoE Standard (802.3af, 802.3at or 802.3bt) for Each Device
Match every IP camera, access point and phone to the right PoE class, check the switch port and the total budget, and avoid devices that reboot or never power up.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.