Hands-on tutorial

Tutorials · Fibre & GPON

How to Design Fibre to the Home (FTTH) for a Villa Compound or Residential Community

Plan GPON for villas and residential compounds: OLT location, duct routes, splitter cabinets, drop cables, ONU choice per home and services such as internet, IPTV, voice and CCTV.

Intermediate10 min6 steps

Before you start

  • A site plan with every villa or unit and the clubhouse or guard house
  • Duct routes and manhole locations
  • The services to deliver to each home

Step by step

  1. Place the OLT

    Put the OLT in a central comms room with power backup and an internet uplink, often in the clubhouse or management building.

  2. Plan feeder and distribution

    Run feeder cables to splitter cabinets in each cluster, then drop cables to each villa. A 1:8 splitter per cluster of eight villas and a 1:4 or 1:8 in the cabinet is common.

  3. Check the optical budget

    Add splitter loss, fibre length, connectors and splices for the furthest villa and keep margin.

  4. Choose ONUs

    Wi-Fi 6 ONUs or a bridge ONU plus a separate router per villa; ONUs with phone ports where needed.

  5. Plan shared services

    Use separate VLANs for internet, IPTV, voice, gate intercoms and compound CCTV, delivered over the same fibre.

  6. Build for maintenance

    Label every splitter port with the villa number, keep spare fibres and splitter outputs, and record optical levels at handover.

Pro tips

  • Lay spare ducts during construction; adding them later is costly.
  • Use outdoor-rated splitter cabinets with locks.
  • Pre-provision ONUs by serial for fast activation.

FAQ

Frequently asked questions

GPON or XGS-PON for villas?

GPON serves most homes today; XGS-PON or combo ports leave room for higher-speed plans.

Can the same fibre carry CCTV?

Yes. Outdoor ONUs or PoE ONUs connect cameras on a separate VLAN.

Stuck on a step?

Ask Navijin technical support or an authorised partner for help with your configuration.