Hands-on tutorial
Tutorials · Video Surveillance
How to Get Clear CCTV Images at Night: IR, Low-Light and Exposure Settings
Fix grainy, blurred or overexposed night video: infrared range, smart IR, starlight sensors, shutter speed, gain, WDR and supplementary lighting.
Before you start
- Access to camera settings
- A night-time test with someone walking through the scene
- The camera datasheet: IR range and minimum illumination
Step by step
Check the IR range
Infrared only reaches the distance on the datasheet. Targets beyond it appear dark. Place cameras or add IR illuminators accordingly.
Avoid IR reflection
IR reflects off nearby walls, eaves and dome covers, washing out the image. Move the camera away from close surfaces and keep domes clean.
Enable smart IR
Smart IR reduces IR strength for close objects so faces are not overexposed.
Set the shutter for motion
Slow shutters (1/12 s and slower) make moving people blurry. For people use about 1/30–1/60 s; for vehicles faster, with more light.
Balance gain and noise
High gain brightens the image but adds noise, which also increases bitrate and storage. Limit gain and add light if needed.
Use colour low-light cameras or white light where useful
Starlight or colour night cameras with a little ambient or white light can give colour images at night, which helps identification.
Test at night and review
Watch recorded footage from different times of night and adjust. Check bitrate at night against your storage plan.
Pro tips
- Spider webs near IR LEDs cause false motion events; clean regularly.
- Use separate day and night profiles where cameras support them.
- Check number plates and faces specifically, not just the overall scene.
FAQ
Frequently asked questions
Why is my camera blurry only at night?
Usually a slow shutter and high gain. Faster shutter plus more light fixes it.
Why does night footage use more storage?
Noise from high gain makes every frame look different to the encoder, raising bitrate.
Keep learning
Related guides
Camera placement and DORI
Read more →H.264 vs H.265
Read more →CCTV maintenance checklist
Read more →How to Set Up IP Cameras With a PoE Switch and NVR
From unboxing to recording: plan IP addresses, power cameras with PoE, add them to the NVR and set recording and retention.
Read more →How to Access CCTV Remotely Without Port Forwarding
Port-forwarding an NVR to the Internet invites attacks. Use a VPN instead and keep cameras invisible from outside.
Read more →How to Configure NVR Storage, RAID and Retention
Install surveillance drives, choose RAID, set recording quotas and confirm you keep footage for the required number of days.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.