Hands-on tutorial
Tutorials · Video Surveillance
CCTV Maintenance Checklist: Monthly, Quarterly and Yearly Tasks
Keep a camera system recording when it matters: check recording, storage, images, time, power, firmware and access on a fixed schedule.
Before you start
- Access to the NVR or video management software
- A camera list with locations
- A ladder or lift for cleaning, and lens cloths
Step by step
Every week: is everything recording?
Check that every channel is online and recording, and look at yesterday's recording timeline for gaps.
Every month: storage and alarms
Check disk health and RAID status, the oldest available recording (does it match your retention?), and that motion and smart events still reach the right people.
Every month: time
Make sure the NVR and cameras use NTP and show the correct time. Wrong timestamps make footage useless as evidence.
Every quarter: image quality
Review each camera by day and night. Look for dirty or fogged domes, spider webs, new obstructions such as trees or signs, and cameras that were moved.
Every quarter: clean
Clean domes and lenses with a soft cloth and lens cleaner, and check housings and cable glands for water.
Every six months: firmware and access
Install security updates on cameras and NVRs, remove accounts of people who left, and check that remote access is only through a VPN.
Every year: test a restore
Export a clip from each important camera as evidence would be requested, and check the UPS runtime.
Pro tips
- Keep a maintenance log with dates and findings.
- Replace surveillance disks proactively after several years of continuous recording.
- Check that cameras still meet their DORI purpose after site changes.
FAQ
Frequently asked questions
How often should CCTV be serviced?
Most organisations check recording weekly and do a physical service every three to six months, more often in dusty or coastal locations.
What is the most common failure?
Failed or full disks and cameras that went offline unnoticed. Automatic alerts prevent both.
Keep learning
Related guides
NVR storage, RAID and retention
Read more →Secure CCTV remote access with a VPN
Read more →Network alerts by email and webhook
Read more →How to Set Up IP Cameras With a PoE Switch and NVR
From unboxing to recording: plan IP addresses, power cameras with PoE, add them to the NVR and set recording and retention.
Read more →How to Access CCTV Remotely Without Port Forwarding
Port-forwarding an NVR to the Internet invites attacks. Use a VPN instead and keep cameras invisible from outside.
Read more →How to Configure NVR Storage, RAID and Retention
Install surveillance drives, choose RAID, set recording quotas and confirm you keep footage for the required number of days.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.