Hands-on tutorial
Tutorials · Video Surveillance
How to Choose CCTV Camera Placement and Lens Using DORI
Decide what each camera must achieve (detect, observe, recognise or identify), then pick the mounting height, distance, lens and resolution that deliver it.
Before you start
- A site plan with entrances, car parks and critical areas
- The camera datasheets: resolution, lens focal length and DORI distances
- Lighting conditions at night
Step by step
Define the purpose of each camera
DORI is a standard (IEC 62676-4) way to describe it: Detection (25 pixels per metre) tells you something is there; Observation (63 px/m) shows what is happening; Recognition (125 px/m) recognises a known person; Identification (250 px/m) identifies a stranger.
Choose the lens and distance
Wider lenses (2.8 mm) cover more area with fewer pixels per metre. Narrow or varifocal lenses (6–12 mm) reach further. Use the DORI distances on the datasheet to place the camera.
Choose resolution for the target
Higher resolution increases pixels per metre at the same distance. For faces at doors and number plates, use a dedicated camera close to the target rather than one wide camera.
Set the mounting height and angle
Mount at 2.5–3.5 m for faces, looking down no more than about 15–30°. Higher mounting is harder to tamper with but shows the tops of heads.
Plan for light
Avoid pointing cameras at the sun or bright doors. Use WDR for backlit entrances and check the infrared range at night.
Test on site
Walk the area at day and night while someone watches the live view. Adjust zoom and angle until the purpose is met.
Pro tips
- Cover every entrance with one identification camera and one overview camera.
- Keep a camera schedule: location, purpose, lens and DORI distance.
- Use AI smart events to cut false alarms from trees and shadows.
FAQ
Frequently asked questions
Is a higher megapixel camera always better?
Not always. Beyond a point, a better lens, better light and closer placement matter more, and higher resolution increases storage.
What is DORI on a datasheet?
The maximum distances at which the camera reaches the detection, observation, recognition and identification pixel densities.
Keep learning
Related guides
AI smart events on IP cameras
Read more →Thermal bi-spectrum cameras
Read more →Calculate NVR storage
Read more →How to Set Up IP Cameras With a PoE Switch and NVR
From unboxing to recording: plan IP addresses, power cameras with PoE, add them to the NVR and set recording and retention.
Read more →How to Access CCTV Remotely Without Port Forwarding
Port-forwarding an NVR to the Internet invites attacks. Use a VPN instead and keep cameras invisible from outside.
Read more →How to Configure NVR Storage, RAID and Retention
Install surveillance drives, choose RAID, set recording quotas and confirm you keep footage for the required number of days.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.