Wi-Fi · 5 min read · 19 November 2026

Wi-Fi Roaming Explained: 802.11k, 802.11v and 802.11r

How Wi-Fi roaming works and how 802.11k (neighbour reports), 802.11v (BSS transition) and 802.11r (fast transition) make it faster and smarter, plus compatibility tips.

In Wi-Fi, the client device decides when and where to roam. 802.11k helps it find nearby access points, 802.11v lets the network suggest a better one, and 802.11r makes the switch so fast that calls are not interrupted.

The three standards

StandardWhat it doesBenefit
802.11kThe access point gives the client a list of neighbouring access pointsFaster scanning, better roaming decisions
802.11vThe network suggests the client move to a better access point (BSS transition)Fewer "sticky" clients, better load balance
802.11rPre-authenticates with the next access point (fast transition)Roams in tens of milliseconds, especially with 802.1X

Why roaming goes wrong

  • Clients stay connected to a distant access point (sticky clients).
  • Too much or too little overlap between access points.
  • Full 802.1X re-authentication on every roam, causing gaps in voice calls.
  • Different SSID settings on different access points.

Practical tips

  • Enable 802.11k and v on all SSIDs; they are widely supported.
  • Enable 802.11r for voice and enterprise SSIDs; test older devices, some don't handle it well.
  • Raise the minimum data rate to discourage sticky clients.
  • Plan about 15–20% overlap between cells.

Configuration steps: Wi-Fi roaming with 802.11k/v.

FAQ

Frequently asked questions

Does the access point force the client to roam?

No. With 802.11v the network can suggest; the client decides.

Should I enable 802.11r everywhere?

Enable it where voice and fast roaming matter, after testing older devices. Some networks use a separate SSID for legacy devices.

What is OKC?

Opportunistic key caching, a vendor-supported way to speed up 802.1X roaming before 802.11r was common.

Need help designing your network?

Navijin engineers provide free design consultations, bills of materials and quotations for business projects.