Infrastructure · 5 min read · 19 November 2026
Online vs Line-Interactive vs Standby UPS: Which Protects Your Network?
The three UPS types compared for network racks, CCTV and outdoor cabinets: how they work, protection level, efficiency, and how to choose capacity and runtime.
A standby UPS switches to battery when power fails. A line-interactive UPS also corrects small voltage changes without using the battery. An online (double-conversion) UPS powers equipment from its inverter all the time, so equipment never sees mains disturbances. Online UPS units give the best protection; line-interactive units are a good, efficient choice where mains power is stable.
Comparison
| Standby | Line-interactive | Online | |
|---|---|---|---|
| Transfer to battery | A few milliseconds | A few milliseconds | None |
| Voltage correction | No | Yes, automatic regulation | Full, continuous |
| Efficiency | High | High | Lower (eco modes help) |
| Typical use | Single desktop devices | Office network racks with stable power | Server rooms, unstable grids, outdoor and industrial cabinets |
Choosing capacity and runtime
Add up the real load, including PoE delivered to cameras and access points, add headroom, and check the manufacturer's runtime tables. Our UPS sizing tutorial shows the calculation.
Do not forget management
A UPS with a network card sends alerts on power failure and low battery, and can shut down NVRs and servers cleanly. Batteries wear out: test runtime yearly and replace batteries every few years.
FAQ
Frequently asked questions
Do switches need a UPS?
Yes, especially PoE switches: when they lose power, every camera, phone and access point behind them goes down.
Is a surge protector enough?
It protects against spikes but not outages or brownouts. A UPS covers both.
What runtime do I need?
Enough to ride out typical short outages or to reach generator power, and to shut down systems cleanly. Many sites plan 15–30 minutes or more for critical racks.
Related
Keep reading
Size UPS power for PoE switches
Read more →Server room environmental monitoring
Read more →Network disaster recovery plan
Read more →Private 5G vs Wi-Fi for Enterprises: Which Wireless Technology Fits?
Compare private cellular networks and enterprise Wi-Fi for factories, ports, campuses and warehouses: coverage, mobility, device support, spectrum, cost and when to combine both.
Read more →What Is Port Security on a Switch? Stop Unknown Devices From Connecting
Switch port security explained: limiting MAC addresses per port, sticky learning, violation modes (protect, restrict, shutdown), when to use it and how it compares with 802.1X.
Read more →Warehouse and Logistics Network Design: Scanners, Cameras and Automation
How to design networks for warehouses and logistics centres: Wi-Fi for scanners and vehicles, outdoor yards and docks, CCTV, industrial switches for automation, and resilience.
Read more →Need help designing your network?
Navijin engineers provide free design consultations, bills of materials and quotations for business projects.