Infrastructure · 6 min read · 19 November 2026
Cat5e vs Cat6 vs Cat6A: Which Network Cable Should You Install?
Ethernet cable categories compared: speeds and distances, 2.5G/5G/10G support, PoE heat, shielding, and which cable to install for offices, Wi-Fi 7 access points and cameras.
Cat5e supports Gigabit (and usually 2.5G) to 100 m. Cat6 supports 5G to 100 m and 10G to about 55 m. Cat6A supports 10G to the full 100 m and handles PoE heat in large bundles better. For new buildings and Wi-Fi 7 access points, Cat6A is the safe choice; Cat6 is a good budget option for desks and cameras.
Comparison
| Cat5e | Cat6 | Cat6A | |
|---|---|---|---|
| Bandwidth | 100 MHz | 250 MHz | 500 MHz |
| 1G at 100 m | Yes | Yes | Yes |
| 2.5G / 5G at 100 m | 2.5G usually; 5G often | Yes | Yes |
| 10G | Not specified | Up to about 55 m | 100 m |
| PoE in large bundles | Runs warmer | Better | Best (thicker conductors, often shielded) |
| Typical use | Existing installations | Desks, cameras, phones | Access points, new buildings, data rooms |
Why it matters for Wi-Fi 7
Wi-Fi 7 access points connect at 2.5G, 5G or 10G and draw PoE+ or PoE++ power. A cable run installed today should last 15 years or more, so Cat6A to every ceiling access point location avoids re-cabling later. See why Wi-Fi 7 needs multi-gigabit switches.
Installation matters as much as category
- Use solid copper, not copper-clad aluminium, especially with PoE.
- Keep the 100 m channel limit, including patch cords.
- Respect bend radius and do not untwist pairs at terminations.
- Certify links with a cable tester and keep the reports.
- Shielded cable needs proper earthing end to end.
FAQ
Frequently asked questions
Is Cat7 or Cat8 better?
Cat8 is for very short data-center links at 25G/40G. Cat7 is not a TIA standard for RJ45 networks. For buildings, Cat6A is the practical top choice.
Can I run 2.5G on my existing Cat5e?
Usually yes, up to 100 m, which is why 2.5G is popular for upgrading access points.
Is shielded Cat6A required?
Not always. Unshielded Cat6A (U/UTP) is common. Shielded types help in noisy environments and dense bundles but need correct earthing.
Related
Keep reading
PoE vs PoE+ vs PoE++
Read more →Long-range PoE and fibre
Read more →Single-mode vs multimode fibre
Read more →Private 5G vs Wi-Fi for Enterprises: Which Wireless Technology Fits?
Compare private cellular networks and enterprise Wi-Fi for factories, ports, campuses and warehouses: coverage, mobility, device support, spectrum, cost and when to combine both.
Read more →What Is Port Security on a Switch? Stop Unknown Devices From Connecting
Switch port security explained: limiting MAC addresses per port, sticky learning, violation modes (protect, restrict, shutdown), when to use it and how it compares with 802.1X.
Read more →Warehouse and Logistics Network Design: Scanners, Cameras and Automation
How to design networks for warehouses and logistics centres: Wi-Fi for scanners and vehicles, outdoor yards and docks, CCTV, industrial switches for automation, and resilience.
Read more →Need help designing your network?
Navijin engineers provide free design consultations, bills of materials and quotations for business projects.