PoE · 6 min read · 19 November 2026
PoE vs PoE+ vs PoE++: 802.3af, 802.3at and 802.3bt Explained
The difference between PoE, PoE+ and PoE++: power per port, classes, which devices need which standard, cable rules and how to check a switch's PoE budget.
PoE (802.3af) delivers up to 15.4 W per switch port, PoE+ (802.3at) up to 30 W, and PoE++ (802.3bt) up to 60 W (type 3) or 90 W (type 4). The device receives a little less because some power is lost in the cable. Choose the standard by the maximum power of each device, then check that the switch's total PoE budget covers every port at once.
The three standards at a glance
| Standard | Name | Power at the port | Power at the device | Typical devices |
|---|---|---|---|---|
| IEEE 802.3af | PoE (type 1) | 15.4 W | about 12.95 W | IP phones, fixed indoor cameras, sensors |
| IEEE 802.3at | PoE+ (type 2) | 30 W | about 25.5 W | Wi-Fi 6/7 access points, PTZ cameras, video phones |
| IEEE 802.3bt type 3 | PoE++ / 4PPoE | 60 W | about 51 W | Multi-radio access points, cameras with heaters, thin clients |
| IEEE 802.3bt type 4 | PoE++ / 4PPoE | 90 W | about 71 W | Displays, kiosks, high-power PTZ, small switches |
Classes and negotiation
Standard PoE devices tell the switch which class they need (class 0–4 for af/at, up to class 8 for bt). The switch reserves or delivers power accordingly and never sends power to a device that does not ask for it. That is why standard PoE is safe for laptops and other non-PoE devices, while passive PoE is not.
Port standard vs total budget
Two numbers matter on every PoE switch. The per-port standard tells you the maximum one port can deliver. The total PoE budget is the power the switch can deliver to all ports at the same time. A 24-port PoE+ switch does not always have 24 × 30 W: check the budget on the datasheet. Add the maximum power of every device, then 20–30% headroom. Our PoE budget guide has worked examples.
Cable and distance
- Use solid copper Cat5e or better. Cat6 or Cat6A runs cooler with high-power bt devices in bundles.
- Stay within 100 m per Ethernet run. For longer runs, see long-range PoE, extenders and fibre.
- 802.3bt uses all four pairs, so every pair must be terminated properly.
How to choose
Read the maximum power on each device's datasheet, choose the lowest standard that covers it, put high-power devices on bt-capable ports, and keep a spare budget for growth. The step-by-step version is in How to choose the right PoE standard.
FAQ
Frequently asked questions
Is PoE+ backward compatible with PoE?
Yes. A PoE+ or PoE++ port powers older 802.3af devices at the class they request.
Do Wi-Fi 7 access points need PoE++?
Many run on PoE+ (802.3at). Some multi-radio models need 802.3bt for full performance; check the access point's datasheet.
What is the difference between 802.3bt type 3 and type 4?
Type 3 delivers up to 60 W at the port, type 4 up to 90 W. Both use all four pairs of the cable.
Related
Keep reading
PoE power budget with worked examples
Read more →Choose the right PoE standard
Read more →Why Wi-Fi 7 needs multi-gigabit PoE switches
Read more →Private 5G vs Wi-Fi for Enterprises: Which Wireless Technology Fits?
Compare private cellular networks and enterprise Wi-Fi for factories, ports, campuses and warehouses: coverage, mobility, device support, spectrum, cost and when to combine both.
Read more →What Is Port Security on a Switch? Stop Unknown Devices From Connecting
Switch port security explained: limiting MAC addresses per port, sticky learning, violation modes (protect, restrict, shutdown), when to use it and how it compares with 802.1X.
Read more →Warehouse and Logistics Network Design: Scanners, Cameras and Automation
How to design networks for warehouses and logistics centres: Wi-Fi for scanners and vehicles, outdoor yards and docks, CCTV, industrial switches for automation, and resilience.
Read more →Need help designing your network?
Navijin engineers provide free design consultations, bills of materials and quotations for business projects.