Hands-on tutorial
Tutorials · Wi-Fi
How to Design Wi-Fi for Warehouses and Handheld Scanners
Cover high racks, cold stores and loading docks, and keep scanners connected while they move, with the right access point placement, antennas and roaming settings.
Before you start
- A layout with rack heights and aisle directions
- The scanner models and their Wi-Fi capabilities
- The applications the scanners use
Step by step
Know the environment
Metal racks and stock reflect and absorb signals, and coverage changes as stock levels change. Survey with racks full, not empty.
Place access points along aisles
Mount access points in the aisles or use directional antennas down the aisles, rather than above the racks, so signals reach scanner height.
Mind the ceiling height
From high ceilings, use access points with directional or downtilt antennas, or mount them lower on racks or columns.
Choose bands for the scanners
Many scanners still work best on 5 GHz with 20 MHz channels. Check what they support before planning 6 GHz.
Tune roaming
Enable 802.11k/v/r if the scanners support them, set the minimum data rate higher to avoid sticky clients, and plan about 15–20% cell overlap.
Cover special areas
Cold stores need access points rated for the temperature or outside the cold room with antennas inside. Loading docks and yards need outdoor access points.
Test with real devices
Walk the routes with a scanner running the real application and check for disconnects and slow scans.
Pro tips
- Mount access points where forklifts can't hit them.
- Keep a spare access point and mounting kit on site.
- Ask the scanner vendor for recommended Wi-Fi settings.
FAQ
Frequently asked questions
Why do scanners disconnect at the end of an aisle?
Usually they keep a weak connection too long and then roam late. Better placement and roaming settings fix it.
Do I need Wi-Fi 7 in a warehouse?
For scanners, coverage and roaming matter more than speed. Wi-Fi 6 or 7 helps where many devices or video are used.
Keep learning
Related guides
Wi-Fi site survey step by step
Read more →Wi-Fi roaming with 802.11k/v
Read more →How many access points do I need?
Read more →How to Set Up Secure Guest Wi-Fi With Client Isolation
Give visitors Internet access without exposing your internal network: separate SSID and VLAN, client isolation, bandwidth limits and an optional captive portal.
Read more →How to Plan Wi-Fi Channels on 2.4, 5 and 6 GHz
Reduce interference and increase capacity by choosing the right channels and widths for each band.
Read more →How to Secure Wi-Fi With WPA3-Enterprise and RADIUS
Replace shared Wi-Fi passwords with per-user authentication using 802.1X, a RADIUS server and WPA3-Enterprise (or WPA2-Enterprise for older devices).
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.