Hands-on tutorial
Tutorials · Video Surveillance
How to Monitor CCTV From Many Sites in One Central Control Room
Connect NVRs at branches, shops or sites to a central monitoring centre: recording at the edge, VPN links, bandwidth for live view, alarms, permissions and health monitoring.
Before you start
- NVRs or cameras at each site
- Site-to-site VPN or secure connectivity to the central site
- Video management software at the centre
Step by step
Record locally
Keep recording at each site so a WAN outage does not lose footage. The centre views live and plays back on demand.
Connect sites securely
Use site-to-site VPNs from each site to the centre. Never expose NVRs to the internet.
Size live-view bandwidth
Use sub-streams for multi-view walls and main streams only for full-screen. Calculate upload per site for the number of cameras viewed at once.
Centralise alarms
Send motion, smart events, tampering and video loss from each site to the central software with site names and priorities.
Control access
Give operators rights per site and per camera; log who viewed and exported footage.
Monitor health
Alert on recorders offline, disks failing and cameras disconnected at every site.
Plan for low bandwidth
For sites with slow links, lower frame rates for remote viewing and rely on event clips.
Pro tips
- Use consistent camera naming: site, area, number.
- Keep time synchronised across all sites.
- Test what operators see when a site link fails.
FAQ
Frequently asked questions
Should video be recorded centrally?
Usually not for many sites: local recording with central viewing uses far less WAN bandwidth.
How much upload does live viewing need?
Several Mbit/s per main stream; sub-streams need much less.
Keep learning
Related guides
CCTV control room and video wall
Read more →Site-to-site IPsec VPN
Read more →Calculate NVR storage and bandwidth
Read more →How to Set Up IP Cameras With a PoE Switch and NVR
From unboxing to recording: plan IP addresses, power cameras with PoE, add them to the NVR and set recording and retention.
Read more →How to Access CCTV Remotely Without Port Forwarding
Port-forwarding an NVR to the Internet invites attacks. Use a VPN instead and keep cameras invisible from outside.
Read more →How to Configure NVR Storage, RAID and Retention
Install surveillance drives, choose RAID, set recording quotas and confirm you keep footage for the required number of days.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.