Hands-on tutorial
Tutorials · Fibre & GPON
How to Plan Fibre to the Room (FTTR) for Hotels and Apartments With GPON
Replace copper riser and corridor switches with a passive fibre network: one ONU per room for Wi-Fi, TV, phone and door systems, managed from a central OLT.
Before you start
- Room counts per floor and the services each room needs
- Riser and corridor routes
- A GPON or XGS-PON OLT and suitable ONUs
Step by step
List services per room
Typical rooms need Wi-Fi, IPTV, a phone, and sometimes door locks, minibars or room control. Choose ONUs with the right ports: Wi-Fi, Ethernet, PoE or phone.
Plan the splitters
Use 1:8 splitters per floor or 1:32 per riser zone. Keep total loss within the optical budget with margin.
Remove powered equipment from floors
Splitters need no power or cooling. Corridor comms cupboards with switches and UPS units can be reduced or removed.
Plan VLANs per service
Map each service to a VLAN on the ONU: guest internet, IPTV multicast, voice and building systems, isolated from each other.
Provision centrally
Register ONUs by serial with service profiles on the OLT, so a replacement ONU only needs its serial updated.
Test each room
Check optical level, Wi-Fi coverage, TV channels and phone in every room before handover.
Pro tips
- Place the ONU where its Wi-Fi covers the room, not inside a metal cabinet.
- Keep spare ONUs pre-registered for fast swaps.
- Use XGS-PON for higher-tier rooms or future growth.
FAQ
Frequently asked questions
Is fibre to the room expensive?
Fibre and splitters cost less than many corridor switches, UPS and cooling; savings depend on the building.
Can I keep existing copper?
Yes, many projects mix fibre to the floor with existing copper in rooms. Fibre to the room gives the longest life.
Keep learning
Related guides
GPON splitter plan for a building
Read more →What is an OLT and an ONU?
Read more →Hotel Wi-Fi design checklist
Read more →How to Provision ONUs on a GPON OLT
Bring a new subscriber or building online: discover the ONU, authorise it, apply a bandwidth profile and map services to VLANs.
Read more →How to Measure Optical Power and Check a Fibre Link Budget
Use an optical power meter and the device's DDM readings to confirm fibre links are healthy and within budget.
Read more →How to Design a GPON Splitter Plan for a Building
Plan PON ports, splitter ratios and locations for a hotel, tower or campus building, and check that every ONU has enough optical power.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.