Hands-on tutorial
Tutorials · Video Surveillance
How to Export CCTV Footage as Evidence Correctly
Find, export and hand over video so it is usable and trusted: correct time, original quality, a player, checksums and a record of who handled it.
Before you start
- NVR or VMS access with export rights
- A clean USB drive or secure share
- Your organisation's evidence and privacy procedure
Step by step
Check the time first
Compare the recorder's clock with an accurate time source and note any difference. Correct timestamps are essential for evidence.
Find the footage
Search by camera and time, or by motion and smart events. Export from a little before to a little after the incident.
Export in original quality
Use the recorder's native export with the original resolution and frame rate. Avoid filming a screen with a phone.
Include a player
Include the vendor's player or export to a common format (such as MP4) if the native format needs special software.
Create a checksum
Calculate a SHA-256 hash of each exported file so anyone can confirm it hasn't been changed.
sha256sum incident_cam03_2026-11-19.mp4 > incident_cam03_2026-11-19.sha256Record the chain of custody
Note who exported the footage, when, from which recorder and camera, and to whom it was handed over.
Protect the copy
Store exports encrypted, share only with authorised people, and delete them when no longer needed under your retention policy.
Commands are generic, industry-standard examples. Exact syntax and menu names vary by model and firmware; check your device's manual on the Documentation page.
Pro tips
- Lock or protect the original recording on the NVR so it is not overwritten.
- Restrict export rights to a few trained staff.
- Practise an export before you need one.
FAQ
Frequently asked questions
Can I just send a screen recording?
It loses quality and can be questioned. Export the original footage whenever possible.
How long must footage be kept?
It depends on local law and your policy. Preserve footage related to an incident until the matter is closed.
Keep learning
Related guides
CCTV maintenance checklist
Read more →NVR storage and retention
Read more →NTP time synchronisation
Read more →How to Set Up IP Cameras With a PoE Switch and NVR
From unboxing to recording: plan IP addresses, power cameras with PoE, add them to the NVR and set recording and retention.
Read more →How to Access CCTV Remotely Without Port Forwarding
Port-forwarding an NVR to the Internet invites attacks. Use a VPN instead and keep cameras invisible from outside.
Read more →How to Configure NVR Storage, RAID and Retention
Install surveillance drives, choose RAID, set recording quotas and confirm you keep footage for the required number of days.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.