Hands-on tutorial

Tutorials · Routing & Internet

How to Add 5G or 4G Backup Internet to a Business Site

Choose a 4G or 5G router or CPE, place it for the best signal, connect it as a second WAN on the gateway and test failover, so the site stays online when the fixed line fails.

Beginner8 min7 steps

Before you start

  • A gateway with a second WAN port or a failover feature
  • A data SIM with a suitable plan
  • Signal information for the site from the mobile operators

Step by step

  1. Pick 4G or 5G

    4G is enough for card payments, voice and email during an outage. 5G suits sites that need near-normal speeds on backup, or that use mobile as their main link.

  2. Choose the device

    Indoor CPEs suit offices with good signal. Outdoor or industrial routers with external antennas suit warehouses, remote sites and cabinets.

  3. Find the best signal

    Test placements near windows or on the roof and read RSRP, RSRQ and SINR on the device. Better signal means better speed and stability, not just more bars.

  4. Connect as WAN2

    Connect the router's LAN port to the gateway's second WAN. Put the mobile router in bridge or IP-passthrough mode if possible, to avoid double NAT.

  5. Configure failover and health checks

    Make the fixed line primary and mobile backup. Use health checks to real internet targets, not just link state.

  6. Control backup data use

    Limit guest Wi-Fi and large updates on the backup link, and set data alerts with the operator.

  7. Test it

    Unplug the fixed line and check payments, voice, VPNs and cloud management keep working. Repeat every quarter.

Pro tips

  • Use a SIM from a different provider than the fixed line, so one outage does not hit both.
  • Install a surge protector on outdoor antenna cables.
  • Monitor the backup link even when it is idle.