Healthcare · 7 min read · 19 November 2026

Hospital Network Design: Reliability, Segmentation and Wi-Fi for Clinical Care

How to design a hospital network: redundant core, segmentation of medical devices, clinical Wi-Fi and roaming, nurse call and RTLS, CCTV, guest Wi-Fi and security priorities.

A hospital network carries life-critical systems: patient monitors, infusion pumps, nurse call, imaging and electronic records. It must be highly available, tightly segmented and give reliable Wi-Fi and roaming across every ward.

Design priorities

AreaWhat matters
Core and data centerRedundant core switches, dual power, redundant links to every building; no single point of failure for clinical systems
Medical devicesSeparate VLANs per device type, strict firewall rules, inventory of every device and its software
Clinical Wi-FiCoverage in every room, corridor and lift lobby; fast roaming for voice badges, tablets and carts
ImagingHigh-bandwidth links (10G or more) between modalities, PACS and viewing stations
Security systemsCCTV, access control and nurse call on their own segments
Guests and patientsIsolated guest Wi-Fi with bandwidth limits and a simple portal

Segmentation for medical devices

Many medical devices run old operating systems and cannot be patched quickly. Put them in their own zones, allow only the flows to their servers, and monitor them for unusual behaviour. Network access control helps place each device in the right VLAN automatically. See what is NAC.

Wi-Fi in clinical areas

  • Design for voice: strong signal (about −65 dBm), overlap for roaming, and 802.11k/v/r where devices support it.
  • Survey with real clinical devices; some only support certain bands.
  • Consider lead-lined rooms in radiology and thick walls in older buildings.

Availability

Use UPS and generator-backed power for network rooms, redundant uplinks for each floor, and tested failover. Plan maintenance with clinical teams. Read more about network high availability.

Navijin's hospital solution page shows a full design with a short film.

FAQ

Frequently asked questions

Should medical devices share Wi-Fi with staff?

They can share access points, but should use separate SSIDs or dynamic VLANs with their own security policies.

How do you protect unpatched medical devices?

Isolation, strict firewall rules, monitoring and NAC, coordinated with the device manufacturer.

Is guest Wi-Fi a risk in hospitals?

Only if it is not isolated. Keep it on its own VLAN with no access to clinical systems.

Need help designing your network?

Navijin engineers provide free design consultations, bills of materials and quotations for business projects.