Video Surveillance · 7 min read

DVR vs NVR: What Is the Difference and Which CCTV Recorder Should You Buy?

DVR vs NVR explained: how each CCTV recorder works, camera and cable types, image quality, PoE, AI analytics, cost and when to choose each, plus what an NVR is and how many channels you need.

A DVR (digital video recorder) records analog CCTV cameras connected by coaxial cable and converts their signal to digital inside the recorder. An NVR (network video recorder) records IP cameras that already send digital video over an Ethernet network, usually powered by PoE. For new installations, an NVR with IP cameras gives higher resolution, smarter analytics and simpler cabling. A DVR mainly makes sense when you are reusing existing coaxial cable and analog cameras.

DVR vs NVR at a glance

DVRNVR
CamerasAnalog / HD-over-coax (AHD, HD-TVI, HD-CVI)IP cameras
CableCoaxial (RG59) plus separate power, or "siamese" cableOne Cat5e/Cat6 cable for data and power (PoE)
Where video is encodedIn the recorderIn each camera
Typical resolution1080p to 5MP, some 8MP2MP to 8MP (4K) and higher
AudioUsually needs extra wiringBuilt into many cameras, same cable
AI analyticsMostly in the recorder, limitedIn the camera and recorder: human/vehicle detection, face capture, line crossing
Cable distanceLong coax runs possible100 m per Ethernet run; extend with switches, long-range PoE or fibre
FlexibilityEach camera must be wired to the recorderCameras can sit anywhere on the network, even at other sites
Best forUpgrading old analog systems cheaplyNew buildings, larger sites, smart analytics

What is an NVR?

An NVR is a dedicated recorder that receives compressed video streams (H.264 or H.265) from IP cameras over the network and writes them to hard drives. Many NVRs include built-in PoE ports, so cameras plug straight into the back of the recorder. Larger systems use a separate PoE switch. The NVR also provides live view, playback, motion and AI event search, and remote viewing from a phone app.

What is a DVR?

A DVR takes the analog video from each coaxial camera, digitises and compresses it, then records it. Modern "hybrid" or XVR recorders accept both HD-over-coax and a few IP cameras, which helps when migrating step by step.

How many NVR channels do you need?

Count today's cameras and add at least 25% for growth. Common sizes are 4, 8, 16, 32 and 64 channels. Also check the recorder's incoming bandwidth (for example 160 or 320 Mbps) and the number of hard-drive bays, because high-resolution cameras use both quickly. Our NVR storage and retention tutorial shows how to size disks.

Cabling and power: why PoE matters

With an NVR, each camera needs one network cable from a PoE switch or the NVR's PoE ports. Check the PoE budget: most cameras draw 5–12 W, while PTZ and heater-equipped cameras can need 25 W or more. See how to choose a PoE switch for IP cameras and the PoE budget guide.

Security tips for either recorder

  • Change default passwords and update firmware.
  • Put cameras and recorders in their own VLAN. See segment IoT and CCTV.
  • Do not expose the recorder directly to the internet with port forwarding. Use a VPN for remote viewing, as in secure CCTV remote access.

Navijin options

Navijin offers IP cameras with human detection, NVRs with built-in PoE, and PoE switches sized for camera projects. Follow our IP camera, PoE switch and NVR setup tutorial, or ask an engineer to size a system.

FAQ

Frequently asked questions

What is the main difference between a DVR and an NVR?

A DVR records analog cameras over coaxial cable and encodes the video in the recorder. An NVR records IP cameras that encode video themselves and send it over an Ethernet network.

Can I connect IP cameras to a DVR?

Only to hybrid (XVR) DVRs that list IP channels. A standard analog DVR cannot record IP cameras.

Is NVR better than DVR?

For new systems, usually yes: higher resolution, audio and power over one cable, better AI analytics and more flexible placement. A DVR is cheaper when reusing existing coax cabling.

Does an NVR need internet?

No. An NVR records over the local network. Internet is only needed for remote viewing, which should go through a VPN or the vendor's secure cloud service.

How much storage does an NVR need?

It depends on camera count, resolution, codec, frame rate and retention days. As a rough guide, one 4MP H.265 camera recording continuously uses about 20–40 GB per day.

Need help designing your network?

Navijin engineers provide free design consultations, bills of materials and quotations for business projects.