Hands-on tutorial
Tutorials · PoE
How to Use PoE Scheduling and Remote Power-Cycling
Save energy by switching PoE off outside business hours, and reboot a frozen camera or access point remotely.
Before you start
- A managed PoE switch
- Correct time on the switch (NTP)
Step by step
Set the clock
Schedules depend on accurate time. Configure NTP first (see the NTP tutorial).
Create a time range
For example, office hours on weekdays.
time-range OFFICE periodic weekdays 07:00 to 20:00
Apply it to PoE ports
Apply only to devices that can be off at night, such as office access points or desk phones. Never apply it to security cameras.
interface range gigabitEthernet 0/1-8 poe time-range OFFICE
Power-cycle a device
Turn PoE off and on again to reboot a stuck device without visiting the site.
interface gigabitEthernet 0/5 poe disable poe enable
Check power use
Confirm the budget and per-port consumption.
show poe
Commands are generic, industry-standard examples. Exact syntax and menu names vary by model and firmware; check your device's manual on the Documentation page.
Pro tips
- Keep cameras, alarm panels and emergency phones on always-on ports.
- Size the PoE budget with 20–30% headroom.
FAQ
Frequently asked questions
Can I reboot a camera from the NavCloud?
Supported Navijin gateways can be managed from NavCloud. For switch ports, use the switch's web or CLI interface.
Keep learning
Related guides
PoE budget calculation
Read more →PoE networking
Read more →How to Troubleshoot PoE Devices That Won't Power Up or Keep Rebooting
A systematic checklist for cameras and access points that stay dark, flicker or reboot at night.
Read more →How to Choose the Right PoE Standard (802.3af, 802.3at or 802.3bt) for Each Device
Match every IP camera, access point and phone to the right PoE class, check the switch port and the total budget, and avoid devices that reboot or never power up.
Read more →How to Power Remote Cameras Beyond 100 m With Long-Range PoE, Extenders or Fibre
Reach gates, car parks and perimeter fences that are more than 100 m from the switch: compare long-range PoE, inline extenders and fibre with a local PoE switch, and pick the right one.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.