PoE Networking

PoE Networking

Power over Ethernet(PoE) Solution for Commercial and Industrial Networks Navijin provides a full range of Power over Ethernet (PoE) product lines, from power sourcing equipment (PSE), including Layer 2+ managed PoE switches, PoE injector hubs, and PoE injectors, PoE extenders, PoE splitters, to PoE powered devices (PD) such as PoE-compliant outdoor wireless access points (APs), PoE-compliant indoor wireless access points (APs), IP cameras and smart phones covering both commercial and Industrial grade applications. Compliant with IEEE 802.3af/at/bt PoE standard, Navijin's PoE products offer PoE power output from 15.4 watts to 30 watts. With years of experience, Navijin continually develops PoE solutions to support efficient and flexible network deployments in every sector.

Enhanced Power Budget

For different applications required by different enterprises and client users, Navijin offers PoE switches ranging from full managed PoE switches, industrial PoE switches to standard PoE switches that feature up to 24 ports and more. With the Ethernet switching, PoE and full power supply system are integrated in one box design. Navijin PoE switches provide various power budgets to satisfy the increasing needs for power consumption of PoE PDs, such as outdoor wireless APs, indoor wireless APs and IP cameras. The IP-based, remote Web management interfaces also provide an effective central power management solution to monitor and control per port power feeding of deployed PDs.

Industrial Outdoor PoE Series

Outdoor PoE collection features Industrial IP 67 PoE++ Gigabit Extender and Injectors. The series is equipped with waterproof cable glands for direct-attach applications. Assembled with waterproof cable gland, it can make the general RJ45 connector weather-proof and provides tight and strong connection. Moreover, it comes with the industrial protection rating of IP67 capable of withstanding humidity, dirt, dust, shock, vibrations, heat and cold perfect for outdoor set up of PoE wireless APs, PoE IP cameras and more.

Frost-proof
Water-proof
Dust-proof
Surge-proof
Vandal-proof

Related Videos

Power over Ethernet

One cable for data and power, from a single camera to a whole campus

Power over Ethernet lets you install access points, cameras, phones and IoT devices wherever there is a cable, with no electrician and no local power supply. Navijin offers PoE switching for every scale: unmanaged desktop units, managed L2/L3 PoE+, multi-gigabit 2.5G PoE, long-range 250 m PoE and industrial DIN-rail models.

802.3af/at
PoE and PoE+ across the range
802.3bt
Higher-power PoE on selected models
250 m
Long-range PoE mode
2.5G / 10G
Multi-gigabit PoE for Wi-Fi 7

The challenge

Why PoE design matters

Power budget

Each switch has a total PoE budget. Exceeding it means cameras reboot at night when IR turns on.

Distance

Standard Ethernet stops at 100 m, but many cameras sit further away.

Wi-Fi 7 bandwidth

New access points need 2.5G uplinks and more power than older models.

Harsh locations

Outdoor cabinets need industrial switches and power supplies.

Solution architecture

An end-to-end Navijin design, layer by layer

  1. L1

    Unmanaged PoE

    Plug-and-play PoE+ switches for small camera systems and offices.

  2. L2

    Long-range PoE

    Switches with a 250 m extended mode for cameras on large sites and car parks.

  3. L3

    Multi-gigabit PoE

    2.5G and 10G PoE switches for Wi-Fi 6/7 access points and 4K cameras.

  4. L4

    Managed L2/L3 PoE

    VLANs, QoS, ACLs and PoE scheduling for business networks, with 10G uplinks on L3 models.

  5. L5

    Industrial PoE

    DIN-rail L2+ PoE switches with SFP uplinks for factories, streets and yards.

Business outcomes

What you gain

01

Lower installation cost

No electrician or power outlet at each device.

02

Central power backup

One UPS at the switch protects every connected device.

03

Remote reboot

Managed PoE lets you power-cycle a frozen camera remotely.

04

Ready for Wi-Fi 7

Multi-gigabit PoE ports match next-generation access points.

Quick reference

PoE standards at a glance

StandardCommon namePower at switch portTypical devices
IEEE 802.3afPoE15.4 WIP phones, basic cameras, sensors
IEEE 802.3atPoE+30 WWi-Fi 6 APs, IR cameras
IEEE 802.3bt Type 3PoE++60 WWi-Fi 7 APs, PTZ cameras
IEEE 802.3bt Type 4PoE++90–100 WHigh-power PTZ, displays, heaters

Always size the total PoE budget for worst-case consumption (IR on, heaters on) plus about 20–30% headroom.

How we deliver

From site survey to handover

  1. 01

    Site survey & requirements

    Our engineers review floor plans, cable routes, user density, camera counts and power, then agree on measurable targets for coverage, bandwidth and uptime.

  2. 02

    High- and low-level design

    You receive a documented design: topology, VLAN and IP plan, PoE power budget, Wi-Fi channel plan and a bill of materials using Navijin part numbers.

  3. 03

    Staging & configuration

    Switches, gateways and access points are pre-configured and labelled before shipping, so installation on site is fast and repeatable.

  4. 04

    Installation & commissioning

    Certified partners install, test and document every link. Wi-Fi is validated with a post-installation survey and camera views are signed off with you.

  5. 05

    Handover & lifecycle support

    As-built documentation, admin training, firmware guidance, warranty and RMA handled through Navijin and our authorised partners.

FAQ

Frequently asked questions

How do I calculate the PoE budget I need?

Add the maximum consumption of every powered device (from its datasheet, with IR and heaters on), then add 20–30% headroom. Choose a switch whose total PoE budget exceeds that figure.

Can PoE really reach 250 m?

Yes, in the extended (long-range) mode of the FEL1010 series. The port speed is reduced in this mode, which is usually enough for a single camera stream. Check the datasheet for the exact mode settings.

Do Wi-Fi 7 access points need PoE++?

Many Wi-Fi 7 access points need more than 30 W at full performance, plus a 2.5G uplink. Check the access point datasheet and pick a multi-gigabit switch with enough power per port.

Plan your network with Navijin engineers

Share your floor plans or site layout. We return a design, bill of materials and budgetary quotation, usually within a few working days.