PoE · 6 min read · 19 November 2026

PoE vs PoE+ vs PoE++: 802.3af, 802.3at and 802.3bt Explained

The difference between PoE, PoE+ and PoE++: power per port, classes, which devices need which standard, cable rules and how to check a switch's PoE budget.

PoE (802.3af) delivers up to 15.4 W per switch port, PoE+ (802.3at) up to 30 W, and PoE++ (802.3bt) up to 60 W (type 3) or 90 W (type 4). The device receives a little less because some power is lost in the cable. Choose the standard by the maximum power of each device, then check that the switch's total PoE budget covers every port at once.

The three standards at a glance

StandardNamePower at the portPower at the deviceTypical devices
IEEE 802.3afPoE (type 1)15.4 Wabout 12.95 WIP phones, fixed indoor cameras, sensors
IEEE 802.3atPoE+ (type 2)30 Wabout 25.5 WWi-Fi 6/7 access points, PTZ cameras, video phones
IEEE 802.3bt type 3PoE++ / 4PPoE60 Wabout 51 WMulti-radio access points, cameras with heaters, thin clients
IEEE 802.3bt type 4PoE++ / 4PPoE90 Wabout 71 WDisplays, kiosks, high-power PTZ, small switches

Classes and negotiation

Standard PoE devices tell the switch which class they need (class 0–4 for af/at, up to class 8 for bt). The switch reserves or delivers power accordingly and never sends power to a device that does not ask for it. That is why standard PoE is safe for laptops and other non-PoE devices, while passive PoE is not.

Port standard vs total budget

Two numbers matter on every PoE switch. The per-port standard tells you the maximum one port can deliver. The total PoE budget is the power the switch can deliver to all ports at the same time. A 24-port PoE+ switch does not always have 24 × 30 W: check the budget on the datasheet. Add the maximum power of every device, then 20–30% headroom. Our PoE budget guide has worked examples.

Cable and distance

  • Use solid copper Cat5e or better. Cat6 or Cat6A runs cooler with high-power bt devices in bundles.
  • Stay within 100 m per Ethernet run. For longer runs, see long-range PoE, extenders and fibre.
  • 802.3bt uses all four pairs, so every pair must be terminated properly.

How to choose

Read the maximum power on each device's datasheet, choose the lowest standard that covers it, put high-power devices on bt-capable ports, and keep a spare budget for growth. The step-by-step version is in How to choose the right PoE standard.

FAQ

Frequently asked questions

Is PoE+ backward compatible with PoE?

Yes. A PoE+ or PoE++ port powers older 802.3af devices at the class they request.

Do Wi-Fi 7 access points need PoE++?

Many run on PoE+ (802.3at). Some multi-radio models need 802.3bt for full performance; check the access point's datasheet.

What is the difference between 802.3bt type 3 and type 4?

Type 3 delivers up to 60 W at the port, type 4 up to 90 W. Both use all four pairs of the cable.

Need help designing your network?

Navijin engineers provide free design consultations, bills of materials and quotations for business projects.