Hands-on tutorial
Tutorials · Wi-Fi
How to Schedule Wi-Fi Networks by Time (Schools, Offices and Hotels)
Turn SSIDs on and off on a schedule: student Wi-Fi during school hours, staff-only Wi-Fi at night, event networks for conference days, and how to avoid breaking roaming and devices.
Before you start
- Access points or a controller that supports SSID schedules
- Correct time on all devices (NTP)
- The time windows for each user group
Step by step
Decide the policy
For example: student SSID 07:30–16:00 on weekdays, staff SSID always on, guest SSID for event days only.
Make sure time is right
Schedules depend on the clock. Configure NTP and the correct time zone on gateways and access points.
Create the schedule
Define the time windows in the controller or cloud platform and attach them to each SSID.
SSID Students schedule: Mon–Fri 07:30–16:00Prefer access policies for some cases
Instead of disabling an SSID, you can keep it on and block internet for a group outside hours. Devices stay connected and reconnect faster.
Tell users
Explain when networks are available so staff and students do not report it as a fault.
Test the edges
Check what happens at switch-on and switch-off times, especially for devices that must stay online.
Commands are generic, industry-standard examples. Exact syntax and menu names vary by model and firmware; check your device's manual on the Documentation page.
Pro tips
- Never schedule the SSID used by phones, cameras or building systems.
- Use schedules to save energy on radios in empty buildings only if no devices depend on them.
- Review schedules each term or season.
FAQ
Frequently asked questions
Does turning off an SSID save energy?
A little. Turning off unused radios saves more, but check that no critical devices depend on them.
Will devices reconnect automatically?
Yes, when the SSID returns, as long as their saved settings are unchanged.
Keep learning
Related guides
School and campus network design
Read more →NTP time sync
Read more →Guest Wi-Fi isolation
Read more →How to Set Up Secure Guest Wi-Fi With Client Isolation
Give visitors Internet access without exposing your internal network: separate SSID and VLAN, client isolation, bandwidth limits and an optional captive portal.
Read more →How to Plan Wi-Fi Channels on 2.4, 5 and 6 GHz
Reduce interference and increase capacity by choosing the right channels and widths for each band.
Read more →How to Secure Wi-Fi With WPA3-Enterprise and RADIUS
Replace shared Wi-Fi passwords with per-user authentication using 802.1X, a RADIUS server and WPA3-Enterprise (or WPA2-Enterprise for older devices).
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.