Hands-on tutorial
Tutorials · Switching
How to Set Up a Small Office Network From Scratch (10–50 Users)
Plan and build a secure, manageable network for a small office: internet and gateway, PoE switch, Wi-Fi, VLANs for staff, guests, phones and cameras, backups and cloud management.
Before you start
- The number of users, desks, phones, cameras and printers
- The office floor plan and where the comms cabinet will be
- An internet connection (and ideally a 4G/5G backup)
Step by step
Plan the VLANs
Use a simple, standard plan: 10 staff, 20 voice, 30 cameras, 40 guests, 50 printers and IoT, 99 management. Write down a subnet for each.
Choose the gateway
A gateway with firewall, VPN, guest portal and AP controller in one box suits most small offices. Connect the internet line to WAN1 and a 4G/5G router to WAN2 for backup.
Choose the switch
A managed PoE+ switch powers access points, phones and cameras. Check the PoE budget and keep 20–30% of ports spare.
Place the access points
Mount ceiling access points about one per 150–250 m², away from metal and in the middle of the areas they serve. Use 2.5G ports for Wi-Fi 7 access points.
Configure SSIDs
Staff SSID with WPA3 or WPA2-Enterprise on VLAN 10; guest SSID with isolation, a portal or OWE, and bandwidth limits on VLAN 40.
Set firewall rules
Guests and cameras reach only what they need; staff reach printers and servers; only IT reaches the management VLAN.
Manage from the cloud
Claim the gateway, switch and access points in NavCloud so you can update firmware, see clients and get alerts remotely.
Back up and document
Export configurations, record passwords in a password manager, and draw a one-page diagram.
Pro tips
- Put the gateway, switch and modem on a small UPS.
- Label every patch panel port and cable.
- Change all default passwords on day one.
FAQ
Frequently asked questions
Do I need a Layer 3 switch?
Not usually. In a small office the gateway can route between VLANs. Layer 3 switches help when inter-VLAN traffic is heavy.
How many access points for 30 people?
Often 2–4, depending on walls and layout. Size for coverage and capacity.
Keep learning
Related guides
Configure VLANs on a managed switch
Read more →How many access points do I need?
Read more →Network switch buying checklist
Read more →NJR gateways and AP controllers
Read more →How to Configure VLANs on a Managed Switch
Separate staff, guests, voice and cameras into their own VLANs: create VLANs, set access and trunk ports, and verify traffic separation.
Read more →How to Set Up Inter-VLAN Routing on a Layer 3 Switch
Route between VLANs at wire speed using switch virtual interfaces (SVIs), a DHCP relay and ACLs that control which networks can talk.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.