Hands-on tutorial
Tutorials · Switching
How to Replace a Failed Switch Quickly and Restore Its Configuration
Be ready for a dead switch: keep configuration backups, a cabling record and a spare, then swap, restore and verify with minimal downtime.
Before you start
- Recent configuration backups of every switch
- Photos or records of which cable goes to which port
- A spare switch of the same or compatible model
Step by step
Confirm the failure
Check power, fans and lights, and try a different power outlet or supply before declaring the switch dead.
Prepare the replacement
Update the spare to the same firmware version as the failed switch if needed, and load the backed-up configuration on the bench.
Record and move cables
Using labels or photos, move each cable to the same port on the new switch, uplinks last.
Restore management and cloud claim
Check the management IP, credentials and, for cloud-managed switches, move the claim to the new serial number.
Verify
Check that uplinks, VLANs, PoE devices and critical services work, and that monitoring sees the new switch.
Process the RMA
Send the failed unit back under warranty and restock the spare.
Pro tips
- Keep one spare per switch model per site or region.
- Store backups off the switch, automatically.
- Practise a swap during a quiet period.
FAQ
Frequently asked questions
Can I restore a configuration to a different model?
Often partly; port numbering and features may differ, so review the configuration before applying it.
How long should a swap take?
With a spare, backups and labels, typically well under an hour.
Keep learning
Related guides
Back up and restore configurations
Read more →Automate backups with Python
Read more →Document and label a network
Read more →How to Configure VLANs on a Managed Switch
Separate staff, guests, voice and cameras into their own VLANs: create VLANs, set access and trunk ports, and verify traffic separation.
Read more →How to Set Up Inter-VLAN Routing on a Layer 3 Switch
Route between VLANs at wire speed using switch virtual interfaces (SVIs), a DHCP relay and ACLs that control which networks can talk.
Read more →How to Configure Link Aggregation (LACP) Between Switches
Bundle two or more links into one logical link for more bandwidth and redundancy using IEEE 802.3ad LACP.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.