Hands-on tutorial
Tutorials · Wi-Fi
How to Install Outdoor Wi-Fi Access Points for Pools, Car Parks and Yards
Plan outdoor coverage, choose antennas, mount and weatherproof outdoor access points, and protect them and the network from water and lightning.
Before you start
- Outdoor-rated (IP66/IP67) access points
- A site plan with the areas to cover
- Outdoor-rated Cat6 cable or fibre, surge protectors and earthing
Step by step
Choose omni or directional
Omnidirectional antennas cover around a pole, for courtyards and pools. Sector or directional antennas cover a long area from a wall, such as a car park or a beach.
Mount at the right height
Mount 4–8 m high for open areas, with a clear view of the users. Higher is not always better: users below a high antenna may be outside its beam.
Mind trees, water and people
Leaves and water absorb Wi-Fi, and so do crowds. Pools and terraces full of people need more access points than empty tests suggest.
Weatherproof everything
Use the supplied glands, form drip loops in cables, point connectors downwards, and seal unused ports. Keep the access point's IP rating intact.
Protect against surges
Earth the pole or bracket, and install Ethernet surge protectors at the access point and where the cable enters the building.
Configure and test
Use the outdoor channel rules for your country, especially on 5 GHz. Walk the area with a phone and check signal and roaming between indoor and outdoor access points.
Pro tips
- Use PoE+ for outdoor access points with heaters.
- Check the operating temperature range for summer heat in direct sun.
- Avoid pointing outdoor access points through windows into rooms; it causes roaming problems.
FAQ
Frequently asked questions
Can I use an indoor access point in a box outdoors?
Not recommended: heat, condensation and the box itself degrade performance and lifetime. Use outdoor-rated units.
How far does an outdoor access point reach?
For phones, often 50–100 m in open space. Phones transmit weakly, so the range is limited by the phone, not the access point.
Keep learning
Related guides
Wi-Fi site survey step by step
Read more →Long-range PoE and fibre for remote devices
Read more →How many access points do I need?
Read more →How to Set Up Secure Guest Wi-Fi With Client Isolation
Give visitors Internet access without exposing your internal network: separate SSID and VLAN, client isolation, bandwidth limits and an optional captive portal.
Read more →How to Plan Wi-Fi Channels on 2.4, 5 and 6 GHz
Reduce interference and increase capacity by choosing the right channels and widths for each band.
Read more →How to Secure Wi-Fi With WPA3-Enterprise and RADIUS
Replace shared Wi-Fi passwords with per-user authentication using 802.1X, a RADIUS server and WPA3-Enterprise (or WPA2-Enterprise for older devices).
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.