Hands-on tutorial
Tutorials · Security
How to Detect and Handle Rogue Wi-Fi Access Points
Find unauthorised access points plugged into your network or impersonating your SSIDs, classify them, locate them and remove them, using wireless scanning and switch data.
Before you start
- Access points or sensors that can scan for neighbouring networks
- A list of your authorised access points and SSIDs
- Access to switch MAC address tables
Step by step
Know the types
A rogue access point is connected to your wired network without approval (high risk). An evil twin imitates your SSID to capture users. Neighbour networks are simply nearby and usually harmless.
Enable wireless scanning
Let access points scan channels in the background or use dedicated sensors, and collect the list of BSSIDs and SSIDs they see.
Classify what you find
Mark your own access points as authorised, neighbours as external, and flag unknown devices broadcasting your SSID names or seen on your wired network.
Check if it is on your wired network
Compare the rogue's wireless MAC address with MAC addresses learned on your switches (often off by one or two). A match means it is plugged into your network.
show mac address-table | include 3c:52:a1Locate it
Use signal strength from several access points to narrow the location, then walk the area with a phone or laptop scanner.
Remove and prevent
Unplug the device, then use 802.1X or port security so unknown devices cannot connect to wall ports again.
Monitor continuously
Alert on new rogue access points and on any SSID that imitates yours.
Commands are generic, industry-standard examples. Exact syntax and menu names vary by model and firmware; check your device's manual on the Documentation page.
Pro tips
- Common rogues are travel routers and consumer access points brought in by staff.
- Wireless containment (deauthentication of rogue clients) may be restricted by law; check before using it.
- Review rogue reports weekly.
FAQ
Frequently asked questions
Is every unknown network a rogue?
No. Most are neighbours. The risk is a device connected to your wired network or copying your SSID.
Does PCI DSS require rogue detection?
Yes. PCI DSS requires testing for unauthorised wireless access points at least every three months.
Keep learning
Related guides
802.1X port authentication
Read more →Port security and MAC limiting
Read more →PCI DSS for networks
Read more →How to Enable 802.1X Port Authentication on Switches
Stop unknown devices from using your network ports: configure 802.1X with RADIUS and MAC-authentication bypass for printers and cameras.
Read more →How to Secure the Management of Switches, Routers and Access Points
A hardening checklist for every network device: strong credentials, SSH only, a management VLAN, access lists and logging.
Read more →How to Segment IoT and CCTV Devices From Your Main Network
Put cameras, smart TVs, sensors and building systems in their own VLANs so one compromised device cannot reach your business systems.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.