Hands-on tutorial
Tutorials · Video Surveillance
How to Add ONVIF Cameras From Other Brands to an NVR
Connect third-party IP cameras to an NVR using ONVIF: enable it on the camera, add it to the recorder, choose streams and check what features work across brands.
Before you start
- Cameras and NVR that both support ONVIF (ideally Profile S or T)
- Camera IP addresses on the camera VLAN
- Camera admin credentials
Step by step
Enable ONVIF on the camera
Many cameras ship with ONVIF disabled or with a separate ONVIF user. Enable it in the camera's web interface and create an ONVIF account with a strong password.
Set time and network
Set NTP on the camera; ONVIF authentication fails if camera and NVR clocks differ too much. Give the camera a fixed IP or DHCP reservation.
Add the camera on the NVR
Search the network or add manually with protocol ONVIF, the IP address, port (often 80) and the ONVIF credentials.
Choose streams
Select the main stream for recording and the sub-stream for live view. Check resolution, frame rate and codec match your storage plan.
Check features
Video, PTZ and basic motion events are usually supported. Smart AI events, audio and two-way talk may only work between the same brand.
Test recording and playback
Confirm continuous or event recording works, and play back footage including night scenes.
Pro tips
- Update camera firmware before adding it; ONVIF bugs are often fixed in updates.
- Record which features work for each model.
- Keep third-party cameras on the same isolated camera VLAN.
FAQ
Frequently asked questions
Why does the NVR say 'authentication failed'?
Most often a wrong ONVIF user or a time difference between camera and NVR. Check NTP on both.
Will AI events work across brands?
Only basic events are standardised. Advanced analytics usually need the same brand or a profile that supports them (Profile M).
Keep learning
Related guides
What is ONVIF?
Read more →Set up IP cameras with a PoE switch and NVR
Read more →Harden IP cameras and NVRs
Read more →How to Set Up IP Cameras With a PoE Switch and NVR
From unboxing to recording: plan IP addresses, power cameras with PoE, add them to the NVR and set recording and retention.
Read more →How to Access CCTV Remotely Without Port Forwarding
Port-forwarding an NVR to the Internet invites attacks. Use a VPN instead and keep cameras invisible from outside.
Read more →How to Configure NVR Storage, RAID and Retention
Install surveillance drives, choose RAID, set recording quotas and confirm you keep footage for the required number of days.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.