Wireless Bridges (PTP/PTMP)

Navijin Wireless Bridges (PTP/PTMP)

Connect Sites Without Digging

Running fiber or copper between buildings, gates, parking lots and remote camera poles is slow and expensive. Navijin outdoor wireless bridges create fast point-to-point (PTP) and point-to-multipoint (PTMP) links over several kilometers, installed in hours instead of weeks.

Navijin Wireless Bridge Range

  • NP-CPE41M: Wi-Fi 6 outdoor PTP/PTMP bridge, up to 2400 Mbps wireless data rate and up to 5 km range, IP65
  • NP-CPE512: 5.8 GHz high-power digital bridge, up to 4 km, Gigabit Ethernet ports, carries up to 15 IP cameras
  • NP-CPE510: 5.8 GHz high-power digital bridge, up to 3 km, carries up to 15 IP cameras
  • NB-OACPE-KIT: adjustable stainless-steel J-mast mounting kit for reliable outdoor installation

Simple to Install

Digital displays and one-click pairing make alignment and setup fast, even for installers without RF experience. AP, Client and Repeater modes support many topologies.

Ideal For

  • Linking buildings on campuses, hotels and factories
  • Connecting gate, fence and parking cameras
  • Remote sites, farms, ports and oil and gas facilities
  • City surveillance and temporary event networks

Wireless bridges (PTP / PTMP)

Connect buildings, poles and remote sites kilometres apart, without fibre

When trenching is too slow or expensive, a wireless bridge delivers a high-speed Ethernet link through the air. Navijin 5.8 GHz bridges and Wi-Fi 6 outdoor PTP/PTMP units connect buildings, cameras and remote sites in hours instead of weeks.

Up to 4 km
NP-CPE512
Up to 1000 Mbps
Air rate (NP-CPE512)
PTP & PTMP
Point-to-point and multipoint
Hours
Typical installation

The challenge

What this network has to handle

Trenching cost

Digging across roads, car parks or land can cost more than the network.

Temporary sites

Construction sites and events need fast, removable links.

Remote cameras

Cameras at gates and perimeters are far from the nearest switch.

Line of sight

Trees, buildings and terrain affect link quality.

Solution architecture

An end-to-end Navijin design, layer by layer

  1. L1

    Long-range PTP

    High-power 5.8 GHz digital bridges for links of up to 3 or 4 km.

  2. L2

    Wi-Fi 6 PTP/PTMP

    Outdoor Wi-Fi 6 units for point-to-point and point-to-multipoint distribution.

  3. L3

    Mounting

    J-mast mounting kit for walls and poles.

  4. L4

    Remote cameras

    IP67 cameras at the far end of the link.

Business outcomes

What you gain

01

Save on civil works

No trenching or permits for cable routes.

02

Deploy in hours

Ideal for temporary and urgent links.

03

Reach remote assets

Cameras and sensors anywhere in line of sight.

04

Redeployable

Move the link when the site changes.

How we deliver

From site survey to handover

  1. 01

    Path survey

    Check line of sight and the Fresnel zone, and confirm mounting heights at both ends.

  2. 02

    Link budget

    Calculate expected signal and throughput for the distance and model.

  3. 03

    Install & align

    Mount both units and align them using signal indicators.

  4. 04

    Validate & document

    Throughput test, configuration backup and handover report.

FAQ

Frequently asked questions

Do I need clear line of sight?

Yes. 5.8 GHz links need clear line of sight and a mostly clear Fresnel zone. Raise the mounting height to clear trees and roofs.

What speed will I get?

Real throughput is lower than the air rate and depends on distance, interference and alignment. We calculate the expected throughput during design.

Point-to-point or point-to-multipoint?

Use PTP for one high-capacity link between two sites. Use PTMP when one central point serves several remote buildings or cameras.

Plan your network with Navijin engineers

Share your floor plans or site layout. We return a design, bill of materials and budgetary quotation, usually within a few working days.