Ports & Logistics

Ports and Logistics

Connectivity Across Terminals, Yards and Warehouses

Ports, free zones, logistics hubs and large warehouses depend on handheld scanners, terminal operating systems, gate automation and wide-area CCTV. Distances are long, metal containers block signals, and equipment faces sun, salt and dust.

Outdoor Wi-Fi and Wireless Bridges

Navijin outdoor access points cover yards and loading areas for scanners and tablets, while point-to-point and point-to-multipoint wireless bridges connect gates, weighbridges and remote cameras where trenching fiber is not practical. Industrial LTE routers provide backup links for mobile and temporary sites.

Rugged Switching and Fiber

Industrial DIN-rail switches with PoE power cameras and APs in outdoor cabinets, and single-mode SFP modules carry traffic across the terminal over fiber. Navijin IP cameras and NVRs give operators clear views of quays, gates and perimeters.

Key Benefits

  • Outdoor Wi-Fi for yards, docks and loading bays
  • Wireless bridges for gates and remote points
  • Hardened PoE switches for outdoor cabinets
  • Long-distance fiber backbone
  • Perimeter and gate surveillance

See our marina solution or request a site design.

Ports & logistics

Connect quays, yards and warehouses across every metre of the terminal

Ports and logistics hubs depend on handheld scanners, gate automation, crane telemetry and CCTV spread across huge open areas. Navijin covers the yard with outdoor Wi-Fi and wireless bridges, ties it together with fibre and secures it with long-range cameras.

Outdoor Wi-Fi 6
High-power IP67 access points
20 km
Single-mode fibre optics
128 ch
Central NVR recording
4G LTE
Mobile and remote connectivity

The challenge

What this network has to handle

Huge open areas

Container stacks block and reflect radio signals, and lighting masts are the only practical mounting points.

Salt, wind and heat

Coastal conditions corrode equipment and demand sealed enclosures and proper grounding.

Operational systems on the move

Handheld terminals, reach stackers and trucks must stay connected while they move through the yard.

Security and customs

Gates, fences and quays need continuous video for security, customs and incident investigation.

Solution architecture

An end-to-end Navijin design, layer by layer

  1. L1

    Yard Wi-Fi

    High-power outdoor Wi-Fi 6 access points on lighting masts cover stacking lanes. 802.11k assisted roaming helps handheld terminals move between them.

  2. L2

    Wireless backhaul

    Point-to-point bridges link masts, gatehouses and remote berths without trenching across operational areas.

  3. L3

    Fibre & edge switching

    Industrial PoE switches in mast cabinets with single-mode optics back to the terminal operations building.

  4. L4

    Gate & perimeter video

    IP67 cameras cover gates, quays and fences, recorded on a central NVR.

  5. L5

    Remote assets

    Industrial 4G LTE routers connect remote gates, weighbridges and temporary sites.

Business outcomes

What you gain

01

Faster turnaround

Reliable connectivity for terminal operating systems and handhelds keeps cargo moving.

02

Better security

Clear video of gates and quays supports customs, security and claims.

03

Flexible expansion

Wireless links extend the network to new berths and yards quickly.

04

Built for the coast

Sealed outdoor hardware and industrial cabinets are selected for coastal conditions.

How we deliver

From site survey to handover

  1. 01

    Site survey & requirements

    Our engineers review floor plans, cable routes, user density, camera counts and power, then agree on measurable targets for coverage, bandwidth and uptime.

  2. 02

    High- and low-level design

    You receive a documented design: topology, VLAN and IP plan, PoE power budget, Wi-Fi channel plan and a bill of materials using Navijin part numbers.

  3. 03

    Staging & configuration

    Switches, gateways and access points are pre-configured and labelled before shipping, so installation on site is fast and repeatable.

  4. 04

    Installation & commissioning

    Certified partners install, test and document every link. Wi-Fi is validated with a post-installation survey and camera views are signed off with you.

  5. 05

    Handover & lifecycle support

    As-built documentation, admin training, firmware guidance, warranty and RMA handled through Navijin and our authorised partners.

FAQ

Frequently asked questions

How many outdoor access points does a container yard need?

It depends on stack height, lane layout and mast positions. We model the yard from your site plan and validate with an on-site survey. Steel containers make predictive design alone unreliable.

Can wireless bridges replace fibre between buildings?

For distances of a few kilometres with clear line of sight, yes. Navijin 5.8 GHz bridges are a fast, low-cost alternative to trenching. Fibre remains the best choice for the core backbone.

How do you protect equipment from lightning on masts?

We specify surge protection, correct grounding and outdoor-rated cabling as part of the low-level design. Your installer follows this during commissioning.

Plan your network with Navijin engineers

Share your floor plans or site layout. We return a design, bill of materials and budgetary quotation, usually within a few working days.