No active equipment in between
Passive splitters replace street cabinets and floor switches: less power, less cooling, fewer failures.
GPON · XGS-PON · EPON · Passive optical LAN
Passive optical networks carry Internet, voice, IPTV, CCTV and Wi-Fi over a single fibre for up to 20 km, with no powered equipment between the central office and the user. The Navijin Optical Access family brings GPON, 10G XGS-PON and EPON systems to ISPs, building operators, hotels, campuses and enterprises.
Watch · 2:34
Why fibre access
Passive splitters replace street cabinets and floor switches: less power, less cooling, fewer failures.
Up to 20 km from OLT to user, with gigabit and multi-gigabit service on the same fibre plant.
One OLT port serves up to 128 GPON or 256 XGS-PON users through optical splitters.
Upgrade from GPON to XGS-PON by changing the electronics, not the fibre.
Internet, SIP voice, IPTV, CCTV, building systems and Wi-Fi backhaul share one managed platform.
ONUs are provisioned, monitored and upgraded remotely from the OLT.
Architecture
A typical design from the core to the user, built entirely from Navijin products. Every model links to its specifications and datasheet.
Layer 3 core switches with 10G/100G uplinks connect the OLTs to the Internet, the data center and service platforms.
Rack-mount GPON, XGS-PON or EPON OLTs, or modular chassis OLTs for large operators, in the central office or main equipment room. Combo ports run GPON and XGS-PON subscribers side by side.
Passive splitters (1:8, 1:16, 1:32, 1:64) in fibre distribution boxes, with single-mode fibre to each building, floor or home. Type B/C protection paths for critical sites.
SFU bridges, Wi-Fi 6 home gateways with voice, PoE ONUs for cameras and access points, and 8- to 24-port MDUs for floors and buildings.
Navijin Wi-Fi access points, IP cameras and IP phones connect to ONUs, powered by PoE where needed.
OLT-based ONU provisioning and monitoring, plus NavCloud for sites, gateways and Wi-Fi.
Choose the technology
| EPON | GPON | XGS-PON | |
|---|---|---|---|
| Standard | IEEE 802.3ah | ITU-T G.984 | ITU-T G.9807.1 |
| Downstream / upstream | 1.25 / 1.25 Gbps | 2.488 / 1.244 Gbps | 9.953 / 9.953 Gbps |
| Typical split ratio | 1:32 – 1:64 | 1:64 – 1:128 | 1:64 – 1:256 |
| Best for | Cost-sensitive FTTH and FTTB | Mainstream FTTH, hotels, campuses | Multi-gigabit homes, businesses, 5G and Wi-Fi 7 backhaul |
| Coexistence | – | Runs with XGS-PON on combo ports | Runs with GPON on combo ports |
Real capacity per user depends on split ratio, traffic profile and service plans.
Where it fits
Residential fibre with Wi-Fi 6 home gateways, voice and IPTV.
One OLT in the basement, MDUs or home gateways on every floor.
Passive optical LAN to every room for Internet, IPTV, phones and Wi-Fi.
Fibre to every building and classroom with minimal telecom-room equipment.
Reliable fibre backbone with protection paths for clinical areas.
PoE ONUs power cameras on poles and in street cabinets.
Optical Access portfolio
Every model links to full specifications and a datasheet.
4-port GPON OLT
View specifications →GPON OLT8-port GPON OLT, 880G
View specifications →GPON OLT16-port GPON OLT, 40G uplinks
View specifications →XGS-PON OLT8-port XGS-PON Combo OLT
View specifications →XGS-PON OLT16-port XGS-PON OLT
View specifications →EPON OLT16-port EPON OLT, enhanced
View specifications →Chassis OLTXGS-PON chassis OLT, 2 service slots
View specifications →Chassis OLTXGS-PON chassis OLT, 7 service slots
View specifications →ONU / ONT1-port GPON/EPON SFU
View specifications →ONU / ONTWi-Fi 6 AX3000 HGU
View specifications →ONU / ONT4-port PoE ONU
View specifications →ONU / ONT24-port PoE MDU
View specifications →How we deliver
Map buildings, homes and devices; estimate subscribers and bandwidth per user.
Split ratios, splitter locations, optical power budget and protection paths.
OLT, ONU, splitters, optics and core switching sized for today with room to grow.
Splicing, light-level testing, ONU provisioning and service templates.
Remote monitoring, firmware management and smooth upgrade to XGS-PON.
FAQ
GPON (Gigabit Passive Optical Network, ITU-T G.984) delivers 2.5 Gbps downstream and 1.25 Gbps upstream per fibre port, shared through passive splitters by up to 128 users over distances up to 20 km.
XGS-PON offers 10 Gbps symmetric capacity, four times GPON downstream and eight times upstream, for multi-gigabit services. Combo OLT ports let both run on the same fibre.
The OLT (optical line terminal) sits in the central office or main equipment room and controls the PON. The ONU or ONT (optical network unit or terminal) sits at the user side and provides Ethernet, Wi-Fi, voice or PoE ports.
Yes. Passive optical LAN uses GPON inside buildings to replace floor switches and copper, reducing power, space and maintenance.
Browse the Optical Access family on navijin.com and request a quotation or design consultation from Navijin sales or an authorised partner.
Share your area, buildings or floor plans. Navijin engineers will propose an optical design, bill of materials and budget.