NP-CPE512
Navijin NP-CPE512 — это уличный беспроводной мост дальнего действия для соединений точка-точка и точка-многоточка. Основные характеристики: 4KM wireless transmit for carrying 15pcs cameras; Support AP/Client/Repeater mode; Support digital display, one-click pairing. Соединяет здания, КПП, камеры и удалённые объекты без прокладки кабеля и применяется на кампусах, в промзонах, на фермах, в портах, на нефтегазовых объектах и в городском видеонаблюдении. Продукция Navijin поставляется с гарантией, локальным RMA и технической поддержкой через наши региональные центры в Дубае, Баку и Триполи и авторизованных партнёров. Даташиты и сертификаты на продукцию предоставляются по запросу.
5.8Ghz 4KM 1000M High Power Digital Wireless Bridge
Модели
Основные функции
- 4KM wireless transmit for carrying 15pcs cameras
- Support AP/Client/Repeater mode
- Support digital display, one-click pairing
- 2x 10/100/1000Mbps Ethernet ports
- Built-in 14dBi 5.8G dual polarization directional antenna
- Supports DC 12V 1A power supply or 24V PoE power supply
Характеристики
| Hardware Configuration | |
| Model | NP-CPE512 |
| Wireless Technology | 5G: 1000M IEEE 802.11a/n/ac 1T1R technology |
| Memory | 128MByte DDR2 |
| Flash | 8MB |
| Network Interface | 2x 10/100/1000Mbps adaptive RJ45 network interface |
| Button | 1x digital switch / reset button |
| Switch | Master-slave dip switch; Master: access point mode / Slave: client mode |
| Indicator Light | Signal / ETH network interface status / Power / System / Digital tube |
| Power Supply | DC 12V 1A / 24V 1A non-standard PoE |
| Power Consumption | <15W |
| Environment | Working: -30°C~55°C(Humid.: 10%~90%) / Storage: -40°C~70°C(Humid.: 5%~95%) |
| Dimensions | 250mm x 90mm x 54mm |
| Weight | 0.56kg |
| Antenna | Built-in high gain 14dBi directional plate antenna (horizontal wave half-angle 60°, vertical wave half-angle 15°) |
| Level of Protection | IP65, 2KV lightning protection |
| RF Characteristics | |
| Frequency Range | 5180GHz ~ 5825GHz |
| Modulation method | OFDM = BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM; DSSS = DBPSK, DQPSK, CCK |
| Output power | 11a @54M: 20±2dB, @6M:23±2Db 11n 20MHz: @MCS9:20±2dB, @MCS0:23±2dB 11n 40MHz: @MCS9:20±2dB, @MCS0:23±2dB 11ac 40MHz @MCS9:20±2dB, @MCS0:23±2dB 11ac 80MHz @MCS9:20±2dB, @MCS0:23±2Db |
| Reception sensitivity | 11a: <-72dbm@54Mbps, <-89dbm@6Mbps 11n 20MHz: <-71dbm@MCS8, <-89dbm@MCS0 11ac 40MHz: <-66dbm@MCS9, <-84dbm@MCS0 11ac 80MHz: <-63dBm@MCS9 <-81dBm@MCS0 |
| EVM | 802.11n: ≤-28 dB 802.11a: ≤-25 dB |
| Frequency | <±20ppm |
| Software Features | |
| Working Mode | Master AP (bridge access point), slave AP (bridge client), switch by dip switch |
| Network mode | Point-to-point, point-to-multipoint (within 8 points) |
| Management | WEB management |
| Bridge Configuration | Wireless mode: Bridge access point / Bridge client switching Bridge SSID, Encryption method (WPA2-PSK, WPA-PSK, no encryption), Bridge password, Wireless protocol,Wireless bandwidth, Wireless channel, Wireless power |
| Network | Static IP / dynamic acquisition |
| System | Login password change, restore factory, local upgrade |
Downloads
Applications
Where the NP-CPE512 is used
Navijin solution designs that use the NP-CPE512 or products from the same family.
Mining
Rugged connectivity from the pit to the processing plant
Read more →Ports & logistics
Connect quays, yards and warehouses across every metre of the terminal
Read more →Oil & gas
Hardened networks for wells, pipelines, terminals and refineries
Read more →Wireless bridges (PTP / PTMP)
Connect buildings, poles and remote sites kilometres apart, without fibre
Read more →Guides
Related technical guides
Need pricing or a design with the NP-CPE512?
Request a quotation or ask our engineers for a complete bill of materials for your project.