Hands-on tutorial

Tutorials · Wi-Fi

How to Install Outdoor Wi-Fi Access Points for Pools, Car Parks and Yards

Plan outdoor coverage, choose antennas, mount and weatherproof outdoor access points, and protect them and the network from water and lightning.

Intermediate9 min6 steps

Before you start

  • Outdoor-rated (IP66/IP67) access points
  • A site plan with the areas to cover
  • Outdoor-rated Cat6 cable or fibre, surge protectors and earthing

Step by step

  1. Choose omni or directional

    Omnidirectional antennas cover around a pole, for courtyards and pools. Sector or directional antennas cover a long area from a wall, such as a car park or a beach.

  2. Mount at the right height

    Mount 4–8 m high for open areas, with a clear view of the users. Higher is not always better: users below a high antenna may be outside its beam.

  3. Mind trees, water and people

    Leaves and water absorb Wi-Fi, and so do crowds. Pools and terraces full of people need more access points than empty tests suggest.

  4. Weatherproof everything

    Use the supplied glands, form drip loops in cables, point connectors downwards, and seal unused ports. Keep the access point's IP rating intact.

  5. Protect against surges

    Earth the pole or bracket, and install Ethernet surge protectors at the access point and where the cable enters the building.

  6. Configure and test

    Use the outdoor channel rules for your country, especially on 5 GHz. Walk the area with a phone and check signal and roaming between indoor and outdoor access points.

Pro tips

  • Use PoE+ for outdoor access points with heaters.
  • Check the operating temperature range for summer heat in direct sun.
  • Avoid pointing outdoor access points through windows into rooms; it causes roaming problems.