Hands-on tutorial

Tutorials · Video Surveillance

How to Choose CCTV Camera Placement and Lens Using DORI

Decide what each camera must achieve (detect, observe, recognise or identify), then pick the mounting height, distance, lens and resolution that deliver it.

Beginner9 min6 steps

Before you start

  • A site plan with entrances, car parks and critical areas
  • The camera datasheets: resolution, lens focal length and DORI distances
  • Lighting conditions at night

Step by step

  1. Define the purpose of each camera

    DORI is a standard (IEC 62676-4) way to describe it: Detection (25 pixels per metre) tells you something is there; Observation (63 px/m) shows what is happening; Recognition (125 px/m) recognises a known person; Identification (250 px/m) identifies a stranger.

  2. Choose the lens and distance

    Wider lenses (2.8 mm) cover more area with fewer pixels per metre. Narrow or varifocal lenses (6–12 mm) reach further. Use the DORI distances on the datasheet to place the camera.

  3. Choose resolution for the target

    Higher resolution increases pixels per metre at the same distance. For faces at doors and number plates, use a dedicated camera close to the target rather than one wide camera.

  4. Set the mounting height and angle

    Mount at 2.5–3.5 m for faces, looking down no more than about 15–30°. Higher mounting is harder to tamper with but shows the tops of heads.

  5. Plan for light

    Avoid pointing cameras at the sun or bright doors. Use WDR for backlit entrances and check the infrared range at night.

  6. Test on site

    Walk the area at day and night while someone watches the live view. Adjust zoom and angle until the purpose is met.

Pro tips

  • Cover every entrance with one identification camera and one overview camera.
  • Keep a camera schedule: location, purpose, lens and DORI distance.
  • Use AI smart events to cut false alarms from trees and shadows.

FAQ

Frequently asked questions

Is a higher megapixel camera always better?

Not always. Beyond a point, a better lens, better light and closer placement matter more, and higher resolution increases storage.

What is DORI on a datasheet?

The maximum distances at which the camera reaches the detection, observation, recognition and identification pixel densities.

Stuck on a step?

Ask Navijin technical support or an authorised partner for help with your configuration.