Traffic growth
Virtualisation, storage and video push core links beyond 10G.
Every enterprise, campus, hospital and data center depends on a fast and resilient network core. When the core fails, everything stops: servers, phones, cameras and Wi-Fi. Navijin chassis and Layer 3 switches are built to keep the core running, with redundancy at every level.
The Navijin DCS5503C is a modular Layer 3 chassis switch with dual hot-swappable management modules, redundant power supply bays and a hot-pluggable fan tray. Line cards such as the DCS55-MS48GE, DCS55-MS48GS and DCS55-MS24GS8X provide high-density Gigabit copper, Gigabit fiber and 10G SFP+ ports, so the chassis grows with your network without replacing the core.
Navijin SG3801 series and Layer 3 managed switches deliver 10G uplinks, full IPv4/IPv6 routing (RIP, OSPF, VRRP), VLAN, QoS and ACL security for aggregation layers and server rooms.
Data center & core switching
The core is the heart of every enterprise network. Navijin core and data center switches offer 10G, 25G, 40G and 100G ports, full Layer 3 routing with OSPF and BGP on selected models, and modular chassis options. Together they let you build a backbone that scales with your business.
The challenge
Virtualisation, storage and video push core links beyond 10G.
A core failure stops the whole organisation.
The core must grow without replacing everything.
Small teams need standard, well-documented designs.
Solution architecture
High-density 100G and 25G switches for server farms and campus cores.
Chassis switches with management and line-card modules grow port by port.
10G Layer 3 aggregation switches with redundant power.
10G/25G network cards and optics for servers and storage.
Business outcomes
100G uplinks remove bottlenecks.
Redundant power, link aggregation and fast-recovery routing.
Add capacity with modules instead of full replacements.
Interoperable routing and switching protocols.
How we deliver
Our engineers review floor plans, cable routes, user density, camera counts and power, then agree on measurable targets for coverage, bandwidth and uptime.
You receive a documented design: topology, VLAN and IP plan, PoE power budget, Wi-Fi channel plan and a bill of materials using Navijin part numbers.
Switches, gateways and access points are pre-configured and labelled before shipping, so installation on site is fast and repeatable.
Certified partners install, test and document every link. Wi-Fi is validated with a post-installation survey and camera views are signed off with you.
As-built documentation, admin training, firmware guidance, warranty and RMA handled through Navijin and our authorised partners.
Recommended products
Every model below links to its full specifications and datasheet.
32x 40/100G QSFP28 L3 Data Center Routing Switch
View specifications →L3 Managed Switch48x 25G SFP28 + 8x 40/100G QSFP28 L3 Data Center Routing Switch
View specifications →L3 Managed Switch24x 10G SFP+ + 4x 100G QSFP28 Layer 3 Core Switch
View specifications →L3 Managed Switch24x 10G SFP+ + 2x 100G QSFP28 Layer 3 Managed Switch
View specifications →L3 Chassis Switch3 Slot Layer 3 IPv6/IPv4 Routing Chassis Switch
View specifications →L3 Chassis Switch6 Slot Layer 3 IPv6/IPv4 Routing Chassis Switch
View specifications →L3 Managed Switch6x 10G SFP+ and 48x 1G Ethernet L3 Managed Switch
View specifications →Expansion Card2x 10G PCIe-8X 10G/5G/1G RJ45 Network card for Intel X540
View specifications →FAQ
Fixed switches such as the NJS-9 series are compact and cost-effective. Chassis switches such as the DCS5503C/DCS5506C let you mix module types and expand over time.
Use 10G SR optics over multimode fibre for short links inside the data center. Use single-mode optics between buildings.
Selected Navijin L3 switches support OSPF and BGP. See each product datasheet for the full protocol list.
Keep exploring
Share your floor plans or site layout. We return a design, bill of materials and budgetary quotation, usually within a few working days.