Hands-on tutorial

Tutorials · Wi-Fi

How to Design Wi-Fi for Warehouses and Handheld Scanners

Cover high racks, cold stores and loading docks, and keep scanners connected while they move, with the right access point placement, antennas and roaming settings.

Intermediate9 min7 steps

Before you start

  • A layout with rack heights and aisle directions
  • The scanner models and their Wi-Fi capabilities
  • The applications the scanners use

Step by step

  1. Know the environment

    Metal racks and stock reflect and absorb signals, and coverage changes as stock levels change. Survey with racks full, not empty.

  2. Place access points along aisles

    Mount access points in the aisles or use directional antennas down the aisles, rather than above the racks, so signals reach scanner height.

  3. Mind the ceiling height

    From high ceilings, use access points with directional or downtilt antennas, or mount them lower on racks or columns.

  4. Choose bands for the scanners

    Many scanners still work best on 5 GHz with 20 MHz channels. Check what they support before planning 6 GHz.

  5. Tune roaming

    Enable 802.11k/v/r if the scanners support them, set the minimum data rate higher to avoid sticky clients, and plan about 15–20% cell overlap.

  6. Cover special areas

    Cold stores need access points rated for the temperature or outside the cold room with antennas inside. Loading docks and yards need outdoor access points.

  7. Test with real devices

    Walk the routes with a scanner running the real application and check for disconnects and slow scans.

Pro tips

  • Mount access points where forklifts can't hit them.
  • Keep a spare access point and mounting kit on site.
  • Ask the scanner vendor for recommended Wi-Fi settings.