Hands-on tutorial
Tutorials · Routing & Internet
How to Add 5G or 4G Backup Internet to a Business Site
Choose a 4G or 5G router or CPE, place it for the best signal, connect it as a second WAN on the gateway and test failover, so the site stays online when the fixed line fails.
Before you start
- A gateway with a second WAN port or a failover feature
- A data SIM with a suitable plan
- Signal information for the site from the mobile operators
Step by step
Pick 4G or 5G
4G is enough for card payments, voice and email during an outage. 5G suits sites that need near-normal speeds on backup, or that use mobile as their main link.
Choose the device
Indoor CPEs suit offices with good signal. Outdoor or industrial routers with external antennas suit warehouses, remote sites and cabinets.
Find the best signal
Test placements near windows or on the roof and read RSRP, RSRQ and SINR on the device. Better signal means better speed and stability, not just more bars.
Connect as WAN2
Connect the router's LAN port to the gateway's second WAN. Put the mobile router in bridge or IP-passthrough mode if possible, to avoid double NAT.
Configure failover and health checks
Make the fixed line primary and mobile backup. Use health checks to real internet targets, not just link state.
Control backup data use
Limit guest Wi-Fi and large updates on the backup link, and set data alerts with the operator.
Test it
Unplug the fixed line and check payments, voice, VPNs and cloud management keep working. Repeat every quarter.
Pro tips
- Use a SIM from a different provider than the fixed line, so one outage does not hit both.
- Install a surge protector on outdoor antenna cables.
- Monitor the backup link even when it is idle.
FAQ
Frequently asked questions
Will my VPN work over 4G?
Yes, if the gateway re-establishes it on the backup link. Many mobile connections are behind carrier NAT, so the site should initiate the VPN.
Can 5G replace fibre?
In some places, yes. Fixed wireless can match entry-level fibre speeds, but performance varies with signal and network load.
Keep learning
Related guides
Dual-WAN and 4G failover
Read more →5G fixed wireless vs fibre
Read more →Monitor WAN latency and loss
Read more →How to Set Up Dual-WAN Failover With a 4G LTE Backup
Keep a branch online when the fibre fails: add a 4G LTE link as a backup WAN with health checks and automatic failover.
Read more →How to Plan IP Addressing and Subnets for a Business Network
A clean IP plan makes networks easier to secure, troubleshoot and grow. Learn a simple scheme you can reuse on every site.
Read more →How to Configure DHCP Scopes, Reservations and Options
Hand out addresses reliably: one scope per VLAN, reservations for printers and cameras, the right DNS and gateway options and sensible lease times.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.