Monitoring · 5 min read · 19 November 2026
Network TAP vs SPAN Port: Which Should You Use for Monitoring and Security?
How network TAPs and SPAN (port mirroring) differ in reliability, packet loss, cost and placement, and which to use for IDS, NDR, troubleshooting and compliance.
A SPAN port (port mirroring) is a switch feature that copies traffic from chosen ports to a monitoring port. A network TAP is a hardware device placed inline on a link that copies every packet passively. SPAN is free and flexible; TAPs are complete and reliable.
Comparison
| SPAN / port mirroring | Network TAP | |
|---|---|---|
| Cost | Built into managed switches | Extra hardware per link |
| Completeness | May drop packets when the switch is busy or the mirror port is oversubscribed | Copies every packet, including errors |
| Impact on the switch | Uses switch resources | None |
| Flexibility | Change sources in configuration | Fixed to one link |
| Installation | No downtime | Brief interruption to insert |
| Best for | Troubleshooting, temporary captures, small sites | Permanent IDS/NDR, critical links, forensics |
Common mistakes with SPAN
- Mirroring several busy ports to one port of the same speed: the mirror drops traffic.
- Mirroring both directions of a full-duplex link into a single port that cannot carry twice the traffic.
- Forgetting to remove a temporary mirror, which leaves sensitive traffic copied to an unused port.
Where to place monitoring
Monitor the internet edge for threats, the core or data center for east-west traffic, and critical server links. Step-by-step: port mirroring for troubleshooting and Suricata IDS.
FAQ
Frequently asked questions
Can a TAP fail and take down the link?
Passive fibre TAPs need no power. Active copper TAPs usually fail open, keeping the link up; check the specification.
Is SPAN good enough for an IDS?
For many small and medium networks, yes, if the mirror port is not oversubscribed. For critical links, use a TAP.
What is a network packet broker?
A device that aggregates, filters and distributes traffic from many TAPs and SPANs to monitoring tools.
Related
Keep reading
Port mirroring for troubleshooting
Read more →Suricata IDS
Read more →Wireshark and tcpdump basics
Read more →Will My Network Keep Working if Cloud Management Goes Down?
Cloud management is convenient, but the network must not depend on it. What should keep working during a cloud outage, what pauses, and what to check when you choose equipment.
Read more →NOC vs SOC: What Is the Difference and Do You Need Both?
A NOC keeps the network running; a SOC keeps attackers out. Compare their goals, tools, alerts and metrics, and see how small and mid-size organisations can combine them.
Read more →The CIA Triad in Practice: Confidentiality, Integrity and Availability on Real Networks
Confidentiality, integrity and availability are the base of information security. See what each one means for switches, Wi-Fi, gateways and cameras, with practical controls for each.
Read more →Need help designing your network?
Navijin engineers provide free design consultations, bills of materials and quotations for business projects.