Wi-Fi · 7 min read · 19 November 2026
How Many Wi-Fi Access Points Do I Need? A Practical Sizing Guide
Estimate how many Wi-Fi access points an office, hotel, school or warehouse needs, by coverage and by capacity, with rules of thumb, worked examples and when to do a site survey.
Size Wi-Fi twice: once for coverage (every area gets a good signal) and once for capacity (every access point serves a reasonable number of active devices). Use whichever gives more access points. Rules of thumb get you a first estimate; a site survey turns it into a design.
Step 1: coverage
In a typical office with plasterboard walls, one ceiling access point covers roughly 150–250 m² at good signal (around −65 dBm or better). Concrete, glass, lifts and metal shelving reduce that. Rooms with thick walls, such as hotel rooms, often need an access point every one to three rooms.
Step 2: capacity
Count the devices, not the people. Most users carry two or three. Plan for about 25–50 active devices per access point for normal office use, and fewer for video calls and heavy downloads. Conference halls, lecture theatres and stadiums need high-density designs with many access points on narrow channels.
| Space | Coverage estimate | Capacity estimate | Typical result |
|---|---|---|---|
| Open office, 800 m², 80 staff | 800 ÷ 200 = 4 APs | 80 × 2.5 devices = 200 ÷ 40 = 5 APs | 5 APs |
| Hotel floor, 20 rooms | 1 AP per 2 rooms = 10 APs | 20 rooms × 2 guests × 2.5 = 100 ÷ 30 = 4 APs | 10 APs (coverage wins) |
| Lecture hall, 300 seats | 1–2 APs | 300 × 2 = 600 ÷ 60 = 10 APs | 10 APs (capacity wins) |
| Warehouse, 3,000 m², scanners | High ceilings, racks: 6–10 APs | Few devices | Coverage-driven, survey needed |
Step 3: design details that change the count
- Bands: 5 and 6 GHz give more capacity but shorter range than 2.4 GHz. Wi-Fi 7 access points on 6 GHz need a slightly denser layout.
- Channel width: 20 MHz on 2.4 GHz; 40–80 MHz on 5 GHz; wider only where there is room.
- Roaming: overlap of about 15–20% between cells lets phones roam smoothly.
- Outdoor areas such as pools and car parks need outdoor access points.
- Uplinks and PoE: each Wi-Fi 7 access point needs a multi-gigabit PoE+ port.
Step 4: validate with a survey
For anything larger than a small office, do a predictive design on the floor plan and an on-site survey. Our tutorials on Wi-Fi site surveys and channel planning show how.
FAQ
Frequently asked questions
Is one powerful access point better than several smaller ones?
Usually not. Several access points at moderate power give better coverage, more capacity and smoother roaming than one at full power.
Do I need more access points for Wi-Fi 7?
On 6 GHz, slightly more than for 5 GHz, because 6 GHz travels less far through walls.
What signal level is good?
About −65 dBm or better for voice and video; −67 to −70 dBm is acceptable for general use.
Related
Keep reading
Wi-Fi site survey step by step
Read more →High-density Wi-Fi design
Read more →Hotel Wi-Fi room by room
Read more →Will My Network Keep Working if Cloud Management Goes Down?
Cloud management is convenient, but the network must not depend on it. What should keep working during a cloud outage, what pauses, and what to check when you choose equipment.
Read more →NOC vs SOC: What Is the Difference and Do You Need Both?
A NOC keeps the network running; a SOC keeps attackers out. Compare their goals, tools, alerts and metrics, and see how small and mid-size organisations can combine them.
Read more →The CIA Triad in Practice: Confidentiality, Integrity and Availability on Real Networks
Confidentiality, integrity and availability are the base of information security. See what each one means for switches, Wi-Fi, gateways and cameras, with practical controls for each.
Read more →Need help designing your network?
Navijin engineers provide free design consultations, bills of materials and quotations for business projects.