Networking · 5 min read · 19 November 2026
Latency, Jitter and Packet Loss: What They Mean and Why They Matter
The three measures of network quality explained simply: what latency, jitter and packet loss are, typical good values for voice, video and gaming, causes and how to measure them.
Bandwidth is how much data a link can carry; latency, jitter and packet loss describe how well it carries it. Real-time applications such as calls and video meetings depend far more on these three than on raw speed.
The three measures
| Measure | What it is | Users notice |
|---|---|---|
| Latency | Time for a packet to reach its destination (often measured round-trip) | Delay in conversations, slow interactive apps |
| Jitter | Variation in latency between packets | Choppy or robotic voice, frozen video |
| Packet loss | Share of packets that never arrive | Gaps in audio, pixelated video, slow transfers |
Typical good values for voice and video
- One-way latency below about 150 ms.
- Jitter below about 30 ms.
- Packet loss below about 1%.
Common causes
- Congested uplinks, especially internet upload.
- Weak Wi-Fi signal and interference.
- Faulty cables and duplex mismatches.
- Long or poor-quality internet paths and VPN overhead.
How to improve
Prioritise real-time traffic with QoS, shape the internet uplink, fix Wi-Fi coverage, and monitor the link continuously. See monitoring WAN latency and loss and what is QoS.
FAQ
Frequently asked questions
Is low latency more important than high bandwidth?
For calls, video meetings and remote desktops, yes. For large downloads, bandwidth matters more.
How do I measure jitter?
Tools like ping series, mtr or VoIP quality reports show variation between packets over time.
What causes packet loss on Wi-Fi?
Weak signal, interference, overloaded access points and roaming problems.
Related
Keep reading
Monitor WAN latency and loss
Read more →Troubleshoot VoIP call quality
Read more →What is QoS?
Read more →Will My Network Keep Working if Cloud Management Goes Down?
Cloud management is convenient, but the network must not depend on it. What should keep working during a cloud outage, what pauses, and what to check when you choose equipment.
Read more →NOC vs SOC: What Is the Difference and Do You Need Both?
A NOC keeps the network running; a SOC keeps attackers out. Compare their goals, tools, alerts and metrics, and see how small and mid-size organisations can combine them.
Read more →The CIA Triad in Practice: Confidentiality, Integrity and Availability on Real Networks
Confidentiality, integrity and availability are the base of information security. See what each one means for switches, Wi-Fi, gateways and cameras, with practical controls for each.
Read more →Need help designing your network?
Navijin engineers provide free design consultations, bills of materials and quotations for business projects.