Infrastructure · 6 min read · 19 November 2026
Cat5e vs Cat6 vs Cat6A: Which Network Cable Should You Install?
Ethernet cable categories compared: speeds and distances, 2.5G/5G/10G support, PoE heat, shielding, and which cable to install for offices, Wi-Fi 7 access points and cameras.
Cat5e supports Gigabit (and usually 2.5G) to 100 m. Cat6 supports 5G to 100 m and 10G to about 55 m. Cat6A supports 10G to the full 100 m and handles PoE heat in large bundles better. For new buildings and Wi-Fi 7 access points, Cat6A is the safe choice; Cat6 is a good budget option for desks and cameras.
Comparison
| Cat5e | Cat6 | Cat6A | |
|---|---|---|---|
| Bandwidth | 100 MHz | 250 MHz | 500 MHz |
| 1G at 100 m | Yes | Yes | Yes |
| 2.5G / 5G at 100 m | 2.5G usually; 5G often | Yes | Yes |
| 10G | Not specified | Up to about 55 m | 100 m |
| PoE in large bundles | Runs warmer | Better | Best (thicker conductors, often shielded) |
| Typical use | Existing installations | Desks, cameras, phones | Access points, new buildings, data rooms |
Why it matters for Wi-Fi 7
Wi-Fi 7 access points connect at 2.5G, 5G or 10G and draw PoE+ or PoE++ power. A cable run installed today should last 15 years or more, so Cat6A to every ceiling access point location avoids re-cabling later. See why Wi-Fi 7 needs multi-gigabit switches.
Installation matters as much as category
- Use solid copper, not copper-clad aluminium, especially with PoE.
- Keep the 100 m channel limit, including patch cords.
- Respect bend radius and do not untwist pairs at terminations.
- Certify links with a cable tester and keep the reports.
- Shielded cable needs proper earthing end to end.
FAQ
Frequently asked questions
Is Cat7 or Cat8 better?
Cat8 is for very short data-center links at 25G/40G. Cat7 is not a TIA standard for RJ45 networks. For buildings, Cat6A is the practical top choice.
Can I run 2.5G on my existing Cat5e?
Usually yes, up to 100 m, which is why 2.5G is popular for upgrading access points.
Is shielded Cat6A required?
Not always. Unshielded Cat6A (U/UTP) is common. Shielded types help in noisy environments and dense bundles but need correct earthing.
Related
Keep reading
PoE vs PoE+ vs PoE++
Read more →Long-range PoE and fibre
Read more →Single-mode vs multimode fibre
Read more →Will My Network Keep Working if Cloud Management Goes Down?
Cloud management is convenient, but the network must not depend on it. What should keep working during a cloud outage, what pauses, and what to check when you choose equipment.
Read more →NOC vs SOC: What Is the Difference and Do You Need Both?
A NOC keeps the network running; a SOC keeps attackers out. Compare their goals, tools, alerts and metrics, and see how small and mid-size organisations can combine them.
Read more →The CIA Triad in Practice: Confidentiality, Integrity and Availability on Real Networks
Confidentiality, integrity and availability are the base of information security. See what each one means for switches, Wi-Fi, gateways and cameras, with practical controls for each.
Read more →Need help designing your network?
Navijin engineers provide free design consultations, bills of materials and quotations for business projects.