Switching · 5 min read · 19 November 2026
Access Port vs Trunk Port: How VLANs Travel Between Switches
The difference between access and trunk ports, tagged and untagged VLAN traffic, native VLANs, hybrid ports for phones and access points, and common mistakes.
An access port belongs to one VLAN and carries its traffic untagged to an end device. A trunk port carries several VLANs, each frame tagged with its VLAN ID using IEEE 802.1Q, between switches, routers and access points.
Side by side
| Access port | Trunk port | |
|---|---|---|
| VLANs | One | Many |
| Tagging | Untagged | Tagged (except the native VLAN) |
| Connects to | PCs, printers, cameras | Switches, routers, access points, servers with VLANs |
Special cases
- IP phones with a PC behind them: the port carries the data VLAN untagged and the voice VLAN tagged (sometimes called a hybrid port).
- Access points: a trunk carries management untagged or tagged, plus one tagged VLAN per SSID.
- Native VLAN: the VLAN sent untagged on a trunk; it must match on both ends.
Common mistakes
- Native VLAN mismatch between switches, causing traffic to leak between VLANs.
- Forgetting to allow a new VLAN on every trunk along the path.
- Leaving unused ports as trunks: set them to access mode in an unused VLAN.
Hands-on: configure VLANs on a managed switch.
FAQ
Frequently asked questions
What is VLAN tagging?
Adding a 4-byte 802.1Q header with the VLAN ID to each Ethernet frame so the receiving switch knows which VLAN it belongs to.
Should the native VLAN be VLAN 1?
Best practice is to use an unused VLAN as native and not carry user traffic on it.
Can a PC use a trunk port?
Only if its network card is configured for VLAN tagging, which is uncommon for normal users.
Related
Keep reading
Configure VLANs on a managed switch
Read more →Voice VLAN and QoS
Read more →Inter-VLAN routing
Read more →Will My Network Keep Working if Cloud Management Goes Down?
Cloud management is convenient, but the network must not depend on it. What should keep working during a cloud outage, what pauses, and what to check when you choose equipment.
Read more →NOC vs SOC: What Is the Difference and Do You Need Both?
A NOC keeps the network running; a SOC keeps attackers out. Compare their goals, tools, alerts and metrics, and see how small and mid-size organisations can combine them.
Read more →The CIA Triad in Practice: Confidentiality, Integrity and Availability on Real Networks
Confidentiality, integrity and availability are the base of information security. See what each one means for switches, Wi-Fi, gateways and cameras, with practical controls for each.
Read more →Need help designing your network?
Navijin engineers provide free design consultations, bills of materials and quotations for business projects.