Tutorials · Video Surveillance
How to Configure PTZ Camera Presets, Patrols and Auto-Tracking
Make PTZ cameras work for you: save presets, build patrol tours, set park positions and use smart tracking where supported.
Before you start
- A PTZ camera on a PoE+ or PoE++ port
- Access to the camera or NVR interface
Step by step
Mount and level
Mount the PTZ securely and high enough to see over obstacles. Check power is sufficient for motors and heaters.
Create presets
Move to key views (gate, car park, loading bay) and save each as a preset with a clear name.
Build a patrol
Combine presets into a tour with dwell times, for example 15 seconds per preset.
Set a park position
After manual control, the camera returns to a default view or patrol after a timeout.
Enable smart tracking
Where supported, let the camera follow people or vehicles that enter a zone, then return to patrol.
Link to alarms
Move to a preset when an alarm input or line-crossing rule triggers.
Test day and night
Check focus and IR at night at each preset.
Pro tips
- Avoid constant patrols on a single critical view; pair the PTZ with a fixed camera.
- Mechanical parts wear: schedule inspections.
FAQ
Frequently asked questions
Why is my PTZ image blurry after zooming?
Allow time for autofocus, check the lens is clean and that IR is not reflecting off nearby surfaces.
Keep learning
Related guides
Video surveillance solution
Read more →How to Set Up IP Cameras With a PoE Switch and NVR
From unboxing to recording: plan IP addresses, power cameras with PoE, add them to the NVR and set recording and retention.
Read more →How to Access CCTV Remotely Without Port Forwarding
Port-forwarding an NVR to the Internet invites attacks. Use a VPN instead and keep cameras invisible from outside.
Read more →How to Configure NVR Storage, RAID and Retention
Install surveillance drives, choose RAID, set recording quotas and confirm you keep footage for the required number of days.
Read more →Stuck on a step?
Ask Navijin technical support or an authorised partner for help with your configuration.